PDA

View Full Version : neovane water pump



wideopen545
01-13-2002, 02:19 PM
ive got a crome neovane water pump for a v drive model number v-755x has a new impeller in it 300.00
also have the front timing cover with pump drive on it has lower mounting legs on it also 100.00 its made by niscon thanks tim 540.427.2090 or e mail

Costello
01-14-2002, 04:02 PM
I've gotten Neovane pumps used for around $100 before. $300 is more than they cost new as I recall.

schiada96
01-14-2002, 04:55 PM
costello you need another

wideopen545
01-14-2002, 06:23 PM
sorry 300.00 is for pump and cover should have read 200.00 for pump and 100.00 for cover

superdave013
01-15-2002, 10:24 AM
A new Magnaflow pump (much better pump) is $235.00 new from eddie marine. They have covers with drives (no legs) for around 125.00.
[This message has been edited by superdave013 (edited January 15, 2002).]

wideopen545
01-15-2002, 04:21 PM
iam sorry what do you want for used
this was ran for two weeks it has fittings and a peice of number 14 or 16 steel braid hose with ends and the plate pickup with fittings
the cam cover is a niscon has cam drive and motor mounts legs made in all for 300.00 thanks tim

wideopen545
01-15-2002, 06:12 PM
the braided hose is about 4 1/2 foot long

Costello
01-15-2002, 08:06 PM
Schiada96, my days of picking pieces of the vanes out of the inlet hose are done, thanks though. I'm running a belt driven pump on the DiMarco. Probably wouldn't be my preference, BUT it's there and has worked for over 15 years and changing my whole plumbing configuration is not in the cards at this 10 seconds. I couldn't find my Glenwood catalog Dave but I knew Neovanes were cheaper than that new, and yes Magnaflow is a much better pump.

schiada96
01-16-2002, 07:21 AM
Costello I'm sure we all have a neovane in laying around in the garage. I can't wait for the river this summer.