PDA

View Full Version : NEED HELP!!!!



blown540flattie
03-29-2002, 12:36 AM
I need help. I am looking for a waterpump that is driven off of the cam and had a drive for a enderly style injection pump. Does any one know who make them? And where i can get one?

V-Drive Tom
03-29-2002, 08:37 AM
Blown540,
Kuhl Products (MIKE KUHL) makes one. Works good, best to buy a new one, not used. ( they changed the sealing part on the newer ones.) It would be good to use the front cover they make for it also. 714-547-7071

V-Drive Tom
03-29-2002, 08:41 AM
What I mean is the timing chain cover. That way all holes line up properly. Then your pump bolts right on to it!

superdave013
03-29-2002, 09:41 AM
You can use any cover that is set up for an injector pump that has the 3 hole mounting pattern. I need an extension anyway so I used an Enderly extension. It has both the 3 and 4 bolt patterns on both ends.
On my new engine I need a new cover so I thought the Old Kuhl River Rat would look nice. (they also make a billet one) The lower fins on the cover hit the balancer. I cut them off so it worked out ok.
Here are some pics of the cover and pump. The one you need is the one in the middle.
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/pump_and_cover.JPG
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/pumps.JPG
While I was cutting the cover I enlarged the water inlets to 1/2" NTP.
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/front_cover.JPG

blown540flattie
03-29-2002, 10:09 AM
Thanks guys!! That is the ticket. I have been pulling hair trying to figure out how i was going to do it. This helped alot. I got many other questions to post along the way. Building a flat from the ground up. Got a lot of pieces missing, and nothing to go from. THANKS AGAIN!!

Costello
03-29-2002, 11:00 PM
Teague sells the Magnaflow pump (cam driven). It's a much nicer piece than the Neovane.

V-Drive Tom
03-29-2002, 11:23 PM
Costello
Read the guys question. We are not telling him to use a neovane pump. He needs to stack an injector pump on it. And if your buying a Magnaflow from Teague..?? Well I wont say the rest....

GofastRacer
03-30-2002, 05:47 AM
Originally posted by blown540flattie:
Thanks guys!! That is the ticket. I have been pulling hair trying to figure out how i was going to do it. This helped alot. I got many other questions to post along the way. Building a flat from the ground up. Got a lot of pieces missing, and nothing to go from. THANKS AGAIN!!
Hey blown540, if it'l help, check out the pics of my Daytona, maybe give you some ideas....
http://briefcase.yahoo.com/gofastracer

Costello
03-30-2002, 05:02 PM
Tom you are right, I didn't read the question properly regarding his injection pump granted. Did I say you told him to use an Neovane? No, you told the guy to use the Kuhl, I copy that loud and clear. Thinking he was only looking for a cam driven pump, I'm just suggesting he stay away from the Neovane, that's all. Tom regarding your comment about Teague, NOT COOL. When Menkens comes up in a less than positive light, I jump right in defending your V-Drive company relentlessly, because I like you. Businessmen should support businessmen positively or remain silent In My Humble Opinion.

V-Drive Tom
04-01-2002, 06:59 AM
Costello
Criticism and Point taken. Sorry to get under your skin that bad. I waited for you to come back on that night. Then I was gone Vintage MotoCross Racing. It was late and...I wont say the rest...

Costello
04-01-2002, 07:13 AM
No Problem Tom, as I said above I like you. It WAS late, and I just came in from a 3-4 hour boat thrash myself and that is why I scanned the info without reading thouroghly, so on that front, my bad.

spectra75
04-01-2002, 08:04 AM
GoFastRacer, Very, very nice Daytona. Show quality.
Spectra75

GofastRacer
04-01-2002, 08:37 AM
Thanks man, I appreciate it........