PDA

View Full Version : Looking for BBC Driveline!



1HOTGMCJET
06-12-2002, 07:03 PM
OK folks, I've had no luck so far, so I'm gonna try posting this again - I'm trying to find either a complete driveline (or just the crank side forward flange) to fit a Big Block Chevy of the old style short Rockwell driveline (6.25" for a 3 point mount) with the 1.25" bearing caps and "G-Clip" style retainers - do you have any leads for me (See pics if you'd like - these are of my current Olds driveline)? - Thanks for any help you can provide! http://free.***boat.net/ubb/smile.gif
http://free.***boat.net/gallery/Gearhead_Garage/Motors_and_Drives/Rockwell_Driveline_Olds.JPG
[This message has been edited by 1HOTGMCJET (edited June 12, 2002).]
[This message has been edited by 1HOTGMCJET (edited June 12, 2002).]
[This message has been edited by 1HOTGMCJET (edited June 12, 2002).]

Cheyenne19
06-12-2002, 07:34 PM
Try calling Tom Morrow at 662-256-4018 or you can fax him at 662-256-4575. He owns Jet Pump Repair in Smithville, MS. He will have what you need. I know that his name is tommorrow. I thought it was funny also.
c19

custom-cruiser
06-12-2002, 08:06 PM
When I needed a new one for my BBC i went to our local Spicer dealer(not a drive line specific shop)called Six States(so maybe one near you)and had them build me one. I think it was about 120.00.
Good luck http://free.***boat.net/ubb/biggrin.gif
CC

AGGRESSOR JETS
06-13-2002, 08:30 AM
I think Glenwood may have what you need.Gardena Ca.323-757-3141 or any good dealer should be able to help. Dave

1tricky1
06-14-2002, 08:12 AM
Rex Marine has those. 909 392-7300. WWW.rexmar.com. (http://WWW.rexmar.com.) The driveline and flange are sold separately though. Make sure your order both if you need the whole assy. Last I heard they were about 150.00
[This message has been edited by 1tricky1 (edited June 17, 2002).]

79Hawaiian
06-14-2002, 10:50 AM
Cannon Drive Shafts Inc
10921 Chandler Blvd
North Hollywood, CA 91601-2944
Phone http://free.***boat.net/ubb/frown.gif818)508-0123
They can repair or fabricate anything you need.