PDA

View Full Version : land & sea stern jack



check88
04-24-2001, 11:11 AM
anyone every installed the l&s stern jack?how much work is involved?the boat in question is an 87 19' checkmate,454 mag,alpha 1.was wondering if this would improve the very harsh ride in rough water that this boat has?the ladies are complaining about certain parts of their anatomy getting bounced around on long trips across the lake.any tips or suggestions appreciated.

Magic Sandbar
04-24-2001, 02:08 PM
I had the same problem with an 18 foot boat. The only cure I found was to get a bigger boat. Long and deep. Then the women will stop complaining and thank you for pleasing them.

MNLavey
04-26-2001, 12:37 PM
Or you just get one of those "Sit down, shut up and hang on" signs!

slowride
05-18-2001, 11:03 AM
check88
have one on my 24ft. the work was done by
local marina. gained 5 mph. I don`t think
it will be much help with your rough ride.
you have to have exstensions welded to
your trim rams. they are supplied with the
unit.wondering how you keep your eyes on
water with those things bouncing all around.
enjoy!!!

WAWAZAT
05-22-2001, 12:07 PM
THE STERN JACK WORKED GREAT ON MY BOAT "207 SKI ELIMINATOR" ADDED 7MPH AND GAVE A LOT OF BOW LIFT AT SPEED. IN THE CHOP IT HELPED ALOT AS FAR AS THE BOUNCING. I HAVE A 350 MAG WITH ALPHA DRIVE.