-
I just wanted to know if anyone has any info on centurion boats just bought a 21 ft 454 berkeley seems like a nice ride never heard anything about the hulls. One thing I would like to ask is the manifold on it has the carb sitting at an angle never seen that either. Any info would be nice
-
That is a Tarantula Intake....
Look for Intimidator here on the Boards he has a Centurion...
SSTSleekcraft may also be able to help you ? there are a few running around down here
Gopherrr
-
Don't know about your hull, but I believe the old Edelbrock Torker intakes used to have the carb mounted slightly twisted (BBC, SBF and others I'm sure). I believe this was to keep the intake runners the same length.
-
somebody has to know more??????Somebody please speak up
-
21ft centurion's first hulls were buit by Dimarco, later they made thier own mold. they are a well built boat, the bottom is the same as a Spectra only a little straighter with Dimarco's new deck. needs a place diverter as it will porpose at ski speeds, Jim Brock
-
More than likey that's an Edelbrock Torker manifold....I had one before on a 70 Chevelle with a 454. It worked great!
-
I ran one of those intakes on my 20' placecraft daycruiser. with a mild but all roller bbc. The intake made the motor feel like a 2 stroke. I called edelbrock and they said change it to a performer rpm. I had a regular performer in the shop and used it. I gained tons of low end power and 3 gps mph just changing the intake. I think that intake is for a real high rpm.... my 2 cents.
-
The old Torkers had the carb slightly twisted to the right. The new ones I believe do not.
I have an old one for the tall oval ports if anyone wants it.