Who makes them? Know of 2 Sangers with outboard steeering that need new rudders.
James Brendel Racing, Dixon, CA. (925) 325-4967
Doesn't Schiada96 make underwater gear too?
Brian
Now schiada96 is the exception to my above post. I know for a fact that he makes everything he sells. Nice stuff too!
Who makes them? Know of 2 Sangers with outboard steeering that need new rudders.
James Brendel Racing, Dixon, CA. (925) 325-4967
But is a 1/2" rudder in a BAH unsafe? Is it illegal with NJBA or IHBA?
The following is from the NJBA rulebook on what is legal for Top Alcohol Hydro, you'll see that 1/2" is the MINIMUM. I would call Ron Braaksma at
909-866-3298 ... he'll send you in the right direction.
TOP ALCOHOL HYDRO - TAH GENERAL
1. Fuel System Mechanized fuel system allowed. The injection system cannot be controlled by exhaust gasses.
2. Fuel Blown Methanol. Unblown Nitro-methane, no percentage limit.
3. Clutch, Flywheel and Bellhousing All boats utilizing a clutch must have a steel hydroformed bellhousing. All boats must have a 360-degree flywheel cover.
4. Neutral Device A devise to allow engagement and disengagement at will of the propulsion device while the engine is running.
5. Prop Shaft The minimum prop shaft diameter through the back of the strut is 1-1/8.
6. Rudder Minimum 1/2 thickness of the clamshell.
ENGINE
1. Any internal combustion automotive type engine permitted. No dual engine set-ups allowed. Maximum 565 cubic inch and 4 valves per cylinder.
2. Supercharger Required roots-type maximum size 14-71, 19 case length, 11-1/4 case width, maximum rotor cavity diameter is 5.840. Helix is restricted to maximum rotor spiral of 6.5 degrees per inch of length. Maximum overdrive 70%.
3. Screw-type superchargers are not allowed.
BB
Thanks Busby.
no prob ...
BB
I've got 2 outboard rudders that I'd like to get rid of. Both are 1/2" thick. PM me with an offer if interested. Here's the longer of the two:
http://www2.***boat.com/image_center...40DSC00596.JPG
http://www2.***boat.com/image_center...40DSC00597.JPG
Heres the other (rudder for sale ONLY, unless you want the whole boat ):
http://www2.***boat.com/image_center...500/540Z10.JPG