I HAVE A BERK WITH A SMALL SET BACK WITH AN ENCLOSER FIRST TIME PULLING THE BOWL A BEAD OF SILICONE IS WHAT SEALS IT. IS THERE AN EASY WAY TO DO THIS. CAULKING GUN JUST TUBE AND A FINGER DOES ANY BODY KNOW? DON'T WANT ANY LEAKS
http://www2.***boat.com/image_center...520/249018.JPG
http://www2.***boat.com/image_center...520/249020.JPG
DO THEY MAKE ANYTHING SPECIAL TO SEAL IN PLACE DIVERTER CABLE AND REVERSE OR DOES IT HAVE TO LOOK LIKE THIS? TO NOT LEAK
http://www2.***boat.com/image_center...90MVC-026S.JPG
http://www2.***boat.com/image_center...90MVC-027S.JPG
ON MY RIDE PLATE I HAVE THIS GTH HOLDER AND SHIMS WORKS FINE BUT WHEN YOUR CRUSING ALONG THE WATER HITS THOSE SHIMS AND THAT HOLDER AND THROWS WATER IN A V SHAPE STAIGHT UP I'VE SEEN THE ONES THAT ARE TURN BUCKLE STYLE OFF THE TOP OF THE BOWL FROM SOME OF THE PICS IN HERE DO THEY WORK ANY BETTER AND DO YOU STILL HAVE THAT WATER V SPRAY
http://www2.***boat.com/image_center...90MVC-028S.JPG
http://www2.***boat.com/image_center...90MVC-029S.JPG
MY NEW MOTER IS A 454 .20 OVER 10.2 COM. 7 1/6 RODS STEEL CRANK 4 BOLT MAIN REC. PORT HEADS INTAKE PORTED TO GASKET SIZE EX. PORTED AND POLISHED 2.19 1.88 EX ROLLER ROCKERS HYD COMP CAM FOR A IMPELLER EXTREME MARINE ELEBR. PROFORER AIR GAP 850 DEMON
NEED SPARK TO 6 GRAND SHOULD I RUN HEI OR THIS MALORY DIST. AND CONTROLER BOX AND COIL
http://www2.***boat.com/image_center...90MVC-034S.JPG
http://www2.***boat.com/image_center...90MVC-035S.JPG
http://www2.***boat.com/image_center...520/249024.JPG
http://www2.***boat.com/image_center...520/249022.JPG
No, your cable seals don't have to look like that. The ones that come with a Place Diveter are a poor seal. We always put one of our own in with a diverter when we sell one. Or we sell the seals seperately, $7.44 ea. Here's an example of how we do it.
http://www.hi-techperformance.com/images/DCP_9843cr.jpg
THATS WHAT I'M TALKING ABOUT, CLEAN! WERE CAN I GET TWO OF THOSE. I NOTICE THAT ONE FOR THE STERING ROD BUT I DON'T HAVE THAT MUCH SPACE
http://www2.***boat.com/image_center...520/249025.JPG
http://www2.***boat.com/image_center...520/249020.JPG
For sealing the bowl, use a caulking gun and put a steady bead around it. Then use a quarter or nickle to scrape off the excess. Leaves a nice finished look to it.
Thanks Very Much See I Knew There Were Some Creative People On These Boards Any Buddy Can Tell You To Use Your Finger But That Coin Trick Sounds Perfect I Could Do All This And Not Ask One ? But Then It Would Look Like Shit Thank You For The Tips Keep'in Coming
sorry went under wife name thanks again for the tips above
dude....if u can afford it get a msd solid state distributer. never did like the mallory light type dist. never seems to do well with high reving motors. besides msd dist is cool looking lol
You have everything but the billet MSD dist, That is all I will run. The silicone trick I have learned to keep the bead nice and smooth is Windex. I also recomend using the squeeze tubes not the gun type, You get a better bead then. Once you lay down the bead spray the bead and the surrounding area with a liberal amount of windex. Wipe silicone bead with your finger wiping excess from your finger regularly. The windex on the surrounding the bead will prevent the silicone from sticking there while wiping. You will end up with a clean silicons job. For the cable seals, You can get those from an electrical supply shop for around $2. If you print the pic you can show them what you are looking for but someone will come on and post what they are called exactly so you look like you know what you are talking about when you go to buy them. I never order them since I steal all the ones I need from my brothers tool box. Have fun. See you on the water.
Cy
No, your cable seals don't have to look like that. The ones that come with a Place Diveter are a poor seal. We always put one of our own in with a diverter when we sell one. Or we sell the seals seperately, $7.44 ea. Here's an example of how we do it.
http://www.hi-techperformance.com/images/DCP_9843cr.jpg
Funny...all I see here is cheap advertising!
maybe a good way to advertise but the through hull fittings look good to me i bought one from a guy at bergerron and paid 25 bucks for it but it worked and i was happy with it. 7 dollars and change is cheep for a something that looks good and works.
Posting Permissions
Reply With Quote