You can get the doubles here:Billet Specialties (http://www.billetspecialties.com/ite...scid=8&pid=202) Don't know about the triples. Maybe Superdave013 can help you.
I was wondering if you guys knew where to get the alum clamps for SS hose like you see when they run two or three side by side ect.
http://www2.***boat.com/image_center...39DSCN1285.JPG
Thanks Jake
You can get the doubles here:Billet Specialties (http://www.billetspecialties.com/ite...scid=8&pid=202) Don't know about the triples. Maybe Superdave013 can help you.
That one still has the lay out die on it. Looks like he made it. If you find a good source let me know. Those would be hard to stock because I would never know what size the 3 hoses would be. So yeah, if you find a source where that has a wide selection that would be cool.
I use zip ties myself. I put one around all the hoses keeping it kinda loose. Then I put one around that one but in between the hoses. Once you tighten things up it keeps all the hoses flat and the distance of a zip tie from each other.
Earls make a varity of them. You typically have to wait for special orders,as most speed shops wont handle the triples or bigger. Good Luck,
http://members.ozemail.com.au/~earls/earls40.jpg
RandyH
Thanks for the info guys .I think the doubles will work just fine.
Jake
Jake, I bought some 1" square rod in clear plastic yesterday. I'm intending on making my own billet plastic clear hose holders. Give me a few days to make the ones for Misfit, and I'll see if you like them. What I like about them is I can make them special for each application and to hold as many lines as I want. ps. their lighter too. Budlight
I ordered some in billet but what about green plastic?
Jake
Jake, I think there may be some colors available but will it be the right green? I'll ask the next time I'm there. Budlight
1" square rod
Anytime you refer to square stock, its called " bar " any time you refer to round stock, its called " rod " I'm not being pickey, just letting you know there IS a deference. I mite be interested in a few clear plastic one's myself. post some pics when you get a chance. SqK :hammer2:
Jake