A little more info on the oval port heads.
I have two options to sell complete motor 454 standerd bore demon 750 oval port heads redo 0 hours on heads torqer 2 intake with two inch spacer chrome valve covers comp cam rockers marine alt stock starter 8.5 to 1 intake has marine thermo state housing new bearings and rings and gaskets 1400.00 obo or will part out cleaned the garage after my boat build this year and found a motor thats funny and didn't even know it also a set of zoomies truck pull style straight up 2 3/4 in. chrome is there but blued no rust
A little more info on the oval port heads.
heads are stock truck oval gen 4 250.00 ready to run, gen 4, 4 bolt main block .20 over lined bored fresh bore new freeze plugs 650.00 demon carb 750 6-7 hrs. 225.00 with fuel line torqer 2 intake with 2 in. riser with holes 6-7 hrs run time 95.00 209 267 5885 chad and 78 south i pm you
Part number on the heads?
be right back going to get them
3933148 gm3t 1969 396 265 hp
from Mortec:
3933148....69-84...oval...OPEN...'69 396/265hp, 366T, 427T, 112cc chamber
thanks thats them
have a 454 crank buried somewhere? Sounds like a friend of mine spun a bearing, haven't done a disassembly yet to find out what's up though.
Cas I've got a crank Ill sell if your buddy is interested. May be too far? Ill get a casting # just in case.