I just received my scoop today. I have always made them out of aluminum.
Does anyone know were I can buy brackets to hold down my scoop when ditching the flame arrestors?
I just received my scoop today. I have always made them out of aluminum.
I just received my scoop today. I have always made them out of aluminum.
Is there anyone who mfgers them or will I have to fab myself?
I dont know of any.You need to fab yourself.
i used a piece aluminum.flat bar with a small hole in it to bolt it to the cabb stud
1/8 x 1 x 9 in long
I used to mount mine with flat bar, BUT now I drill a 1/4 inch hole in between the carb holes[ bottom of scoop] and make a piece of thin flat plate the exact distance between the 2 carb airhorns. drill a 1/4 inch hole in the middle of the plate and install 1/4 inch bolt up thru the scoop and install a locknut inside! Best mount I ever made and doesn't affect airflow in anyway. Budlight
I'll go pick up some material and fab one one up
I just received my scoop today.
Where did you get it from? I am looking for one also.