What collar? I don't know what you're talking about. Budlight
I'm putting the last of the boat together and I'm not sure on the proper adjustment for the collar near the driveshaft on a Berkley JG pump
Thanx for any help.
What collar? I don't know what you're talking about. Budlight
I'm not sure what it's called, but the part nearest the u-joints and has two bolts on either side that swing into place and tighten down. I don't have a pump schematic or i could be more accurate.
The packing gland bolts?
OK is there a specific adjustment or torque?
OK is there a specific adjustment or torque?
Snug !!! Slight drag on shaft !!!
some one told me it should drip about one drop of water per 5 seconds at idle. never really checked it out myself.
THis I got from Jack McClure at MPD. IF it is the new teflon packing then it should drip a little. Needs water to lubricate. A drip every 5 to 10 sounds good. if is NOT dripping then that is bad.
THis I got from Jack McClure at MPD. IF it is the new teflon packing then it should drip a little. Needs water to lubricate. A drip every 5 to 10 sounds good. if is NOT dripping then that is bad.
Hangin out in Japan missing my boat
Well get back here and go boating !!!
Or atleast take a Junk for a spin !!!
Well get back here and go boating !!!
Or atleast take a Junk for a spin !!!
I think about it ALL the time. Man do I miss it. Will be back 2009.