I've got a Ford crankshaft & a set of rods with pistons that I didn't remember having.... The number on the crank is 2YABC. Pistons have a number on top: H535P .030 (thirty over?) Under that set of numbers is this: 066-02-05-B.
Rods have a number down by the caps: C9AE.
Hopefully, these will give me a little insight into what I've got here...
Thanks for any help!
2YABC6303 is a 460 crank, '68 to 78 6303 is the part number to add.
460 68-78 2Y 2YA 2YAB 2YABC Stroke:3.85 Main Brng:3.000 Rod Brng:2.500
Rods are C9AE 1969, Full-size/Galaxy, engine part
Should be C9AE6200 for full part #
Here's 460 specs. Measure the pistons & see if they are 460 -- .030" oversize.
460 -- Bore & stroke 4.36" x 3.85" Manuf years.- 68-80+ Bore spacing 4.90"
http://raceabilene.com/kelly/hotrod/engine.html
Here's another... the pistons are not FORD part #'s. I'm sure they bought aftermarket like everyone. May be old TRW's.
http://www.hammar.dyndns.org/~djhamma/partnumb.htm
Here's another... the pistons are not FORD part #'s. I'm sure they bought aftermarket like everyone. May be old TRW's.
http://www.hammar.dyndns.org/~djhamma/partnumb.htm
I believe the pistons are Speed-Pro Hyperuetectic, Ebay is littered with those.
Thx for the clarification Rebel, I just tossed a SWAG out there since there were no ford ref #'s for pistons anyhow. :messedup:
Posting Permissions
Reply With Quote