piston help

[Oldsquirt]

I suspect that the 1.242" compression height measurement is incorrect. Venolia lists pistons with a 1.280" compression height for use with 4.250" stroke on a 6.385" rod. That would leave the piston .010" down in a 9.8" deck block.
Venolia Pistons (http://www.venolia.com/catalog2005.pdf#search='venolia piston') Scroll down to the bottom of page 10 and all of page 11

[steelcomp]

There ya go...can't argue with hard info like that.
Thanks Oldsquirt.

[Nucking futs]

I suspect that the 1.242" compression height measurement is incorrect. Venolia lists pistons with a 1.280" compression height for use with 4.250" stroke on a 6.385" rod. That would leave the piston .010" down in a 9.8" deck block.
Venolia Pistons (http://www.venolia.com/catalog2005.pdf#search='venolia piston') Scroll down to the bottom of page 10 and all of page 11
We have a winner. After measuring a bit more this all worked out
1.280 ch 13.1 comp. 4.25 stroke 6.385 rod pn 39369. Thanks a bunch for your help.
Bruce said exactly what allen @ bpe said but it did'nt make sence to me.that was a weird combo for sure.

[steelcomp]

We have a winner. After measuring a bit more this all worked out
1.280 ch 13.1 comp. 4.25 stroke 6.385 rod pn 39369. Thanks a bunch for your help.
Bruce said exactly what allen @ bpe said but it did'nt make sence to me.that was a weird combo for sure.
So how much??

[Nucking futs]

300 plus shipping

[steelcomp]

300 plus shippingWith pins? If so, what are they?

[Nucking futs]

No pins. just pistons.