Vortech SC and Superchiller

[x7734x]

Thinking of going the N/A route. I have the complete set up here is a couple pics.
It is currently installed on a 516 BB and the pulley system is set up for 4 psi. It makes over 700 hp on this set up.
I know what other set-ups like this are going for so I will entertain serious offers only.
Thanks,
Brian

[Beer-30]

http://www2.***boat.com/forums/attac...chmentid=15552
http://www2.***boat.com/forums/attac...chmentid=15553

[x7734x]

thanks for the repost of the pics

[Beer-30]

Nice rig!

[Daytona100]

What kind of speeds were you running? What gear ratio in the drive and what pitch prop. Thanks for any info.

[Beer-30]

Those appear to be throttle-bodies under the lid? This is an EFI setup, yes? You may want to knock down alot of the pulley-kickers by laying out what all would be in the package. Intake-up? Intercooler and blower only? ECM and fuel pump?

[x7734x]

What kind of speeds were you running? What gear ratio in the drive and what pitch prop. Thanks for any info.
I had it at 98 on mead. Prop pitch is 30 as far as the gear ratio i'm still trying to get a hold of the privious owner to find out. I was told the boat will do just over 100. Which I believe as i had more throttle to go just didn't want to push it.

[x7734x]

Those appear to be throttle-bodies under the lid? This is an EFI setup, yes? You may want to knock down alot of the pulley-kickers by laying out what all would be in the package. Intake-up? Intercooler and blower only? ECM and fuel pump?
Im looking into purchacing a motor from dynoflo here in Vegas and we are still going over the details as to the fule system. As for now the blower, pulleys, and super chiller are what is up for sale. I will sell the whole system for the right price though.
You are correct it is an EFI system.

[Havasu Carrera]

Can that chiller be used with a 8-71?