I had some but threw them out when I cleaned out the garage. Darn.
Hey guys, I need a set of evidently unusual BBC heads. They are rectangle port heads but they are closed chamber instead of open chambered like the 990's. The casting # is 3904391, listed as a 396 and 427 is all I came up with. The ones my buddy has are junk. If he goes to the 990's he will have to go to dome pistons to stay at the same compression he's at. Any suggestions? If anyone knows where to find some of these let me know.
F.J.
I had some but threw them out when I cleaned out the garage. Darn.
Funny girl huh? wink
C.
Let me check when I get home...might have a set.
zack
I might have a set in the shed. I'll try and get an answer for you tonight, if not for sure tomorrow night.
Chris
No really.
buy from the guys on the boards if you can. If not you can give paul pfaff race engines a call. THey had lots of used bbc heads at their garage sale last weekend.If no luck there,start hitting up the swap meets. Good luck to you.
Razor and Flat Broke, let me know what you guys find because he will buy them. If no one on here has them I will give Pfaff a call and see what he has, thanks for the tip on that cs19. Rvrbrts, you threw those out but kept all that other crap in there? wink Keep on cleaning chick, you might run across a BDS 1071 blower burried underneath all the old stuffed animals and bicycles. Let me know wink .
F.J.
Hey F.J the head you are looking for is a pretty hard one to find it is for a 67 427 corvette i have a nice pair of 840 casting which are basically the same head closed chamber square port they are just a later 1969 head if interested give me a call. Thanks Bruce 714-209-0390
[ October 01, 2003, 11:06 AM: Message edited by: Squeezing Spectra ]
um, I have some 990's complete. 750.00 smile_sp
come to think of it. I have the rods& pistons out of my LS7 454 for the 990 heads.
[ October 01, 2003, 06:43 PM: Message edited by: sanger mike ]