Page 1 of 3 123 LastLast
Results 1 to 10 of 29

Thread: So whats your prop size and gear and mph?

  1. #1
    jimthetoolman
    So whats your prop size, gear and mph? Don't lie either.

  2. #2
    469 the coyote
    The 11 sec motor in are canyon has an 11/16 with 15%gears and it run 96 to 100 mph and my 9sec motor went 120mph with the same prop and gears.

  3. #3
    jimthetoolman
    Damn... what rpm?

  4. #4
    469 the coyote
    The 11 sec motor turns 7300 to 7500 and the 9 sec is about 8300 to 8500

  5. #5
    Carnivalride
    An 11 x 16p with 12's does this in my Hondo at 7200rpm.
    http://www.***boat.com/forums/attach...chmentid=18279

  6. #6
    flattie
    11 1/8 th X15 loaner prop 18s in the box full of gas and mufflers in a Heavy sanger 7500 rpm 106 on the Gps. Going to try to get a better number than that next summer

  7. #7
    Marty Gras
    20' open bow, v- bottom with a pad. 6000RPMs, 1.29 gear, 11 1/4" X 16 three blade Menkens prop. 99 to 101MPH (depending on the wind). Motor has gone 6700RPMs in this boat.

  8. #8
    Brazos River Rat
    11 x16 prop 15 gears runs 83-84 GPS at 6100 RPM .

  9. #9
    MR.ED Hydro
    11 1/2 x 16 with lightened 1.32 gears. 109.8 at Lake Ming through the lights with only a 10.8:1 compression on a 408ci - no blower or nitrous. :rollside:

  10. #10
    jimthetoolman
    Your running a hydro right? Is that why your running a 11 1/2 prop? Thats awsome what RPM?

Page 1 of 3 123 LastLast

Similar Threads

  1. big gear smallprop/small gear big prop
    By lilrick in forum V-Drives
    Replies: 27
    Last Post: 10-02-2006, 09:23 AM
  2. help on prop size
    By 245 LIMITED in forum Out Drive
    Replies: 2
    Last Post: 07-14-2006, 10:22 PM
  3. prop size help please!!!!
    By littlejake in forum Out Drive
    Replies: 5
    Last Post: 01-26-2006, 07:30 PM
  4. what size prop?
    By 76cole in forum V-Drives
    Replies: 24
    Last Post: 12-08-2004, 04:54 PM
  5. prop size????????
    By aquaholic IV in forum Gear Heads
    Replies: 5
    Last Post: 11-08-2002, 08:32 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •