Results 1 to 6 of 6

Thread: Part #'s ID

  1. #1
    gnarley
    I am trying to ID the pistons in my Mark V 454 block & trying to figure out without completely removing the entire thing & striping it what is in it.
    The Piston part # is 10232427 & they look like forged slugs but I sure would like to know for sure!
    The block ID as a 10114182...454.......91-up...4-bolt, Gen.V And from checking on the GM performance site I think the crank is steel but not sure.
    The heads look like stock Mark V as well with this info 10114156...91-up...oval...OPEN...Gen.V & VI 454, 118cc chamber. Any info on the runner volumes, flow rates & RPM range would be helpful and they have part # 14081040 exh valves that some how came up as 502 valves *VALVE, EXHAUST (1.72")& guessing that the intakes are *VALVE, INTAKE (2.07")??? Without disassembling
    In case your wondering I found a little water in #8 so I pulled the head to investigate & found a leaking head gasket so while I'm in there I wanted to find out more info about this motor before a fall teardown.
    Thanks for any info

  2. #2
    LeadFootTheRabbit

  3. #3
    gnarley
    Been there-done-that but no piston # numbers. frown

  4. #4
    LeadFootTheRabbit
    Call Nick at ARIAS pistons. 1-310-532-9737
    A real knowledge of pistons this guy has. Good luck...LDFTRBT

  5. #5
    502procharger
    gnarley,
    just a thought, do they even make a 91 and up 454 block with a 4 bolt block that does not have a steel crank? i thought(and i could be wrong) that all 4 bolt bbc had steel cranks. who knows, i am kind of shitfaced right now.

  6. #6
    Fiat48
    I have a GM performance catalog from 1992 but can't find any of those numbers.

Similar Threads

  1. Part one of part two, Cooling down that RV in the Desert:
    By Trailer Park Casanova in forum How to Section
    Replies: 11
    Last Post: 09-11-2007, 05:34 AM
  2. 460 .didn't get the part
    By hoolign in forum Sandbar
    Replies: 3
    Last Post: 07-28-2007, 06:52 PM
  3. I need a part
    By 86 catalina in forum Jet Boats
    Replies: 10
    Last Post: 02-19-2006, 10:56 PM
  4. Hey Rex One! - Part Two
    By Rexone in forum Bench Racers
    Replies: 58
    Last Post: 08-11-2004, 11:07 AM
  5. DOES ANYONE HAVE THIS PART???
    By Wet Dream in forum Bench Racers
    Replies: 29
    Last Post: 04-26-2002, 05:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •