71 tahiti project $700

[mexrunner]

71 tahiti project boat on a single axle trailer all white needs gel around the cap were i repaired cracks solid hull comes with olds motors and spare parts almost two complete motors no pump has berk intake and transom adatper also comes with white interior in fair conditon 700 firm also availible with blue printed pump by tom papp for 1,500 obo.
(951)323-1899
some pics when it was running about two yrs ago
http://www.hotboatpics.com/pics/data...0_0652__3_.JPG
http://www.hotboatpics.com/pics/data...0_0655__2_.JPG

[mexrunner]

bump

[jetboatjoe]

would you sell the interior it self thanks

[KONABoy71]

hey how are the engines, do they run or what??? what parts do you have for them.

[KONABoy71]

also, what model pump do you have???

[mexrunner]

one complete motor one with out heads and carb neither run all marine parts, mallory dist, one factory points converted to electronic, two alum intakes edel, and polished offy, marine holley 650 1 10qt oil pan,cast alum valve covers finned like m/t style, comes with all gauges(stewart warner) steering cable works fine but plastic covering breaking off , pto adapter, driveshaft, comes with two gal of white gel coat to respray cap, has eddie marine 4 in through hull ss tips with mufflers and no burn flapper, dual battery trays, stringers and floor solid good carpet. the one motor is torn down and will bore to .060 deburred and hot tanked.the crank was ground and polished. other motor spun rod bearing and i never pulled apart sealed it up and left it.has e heads will throw in the c heads for another 200. trailer was sandblasted rewired epoxy primed and painted 2 years ago new wheel bearings seals at that time new trailer tires. pump is a berkley 12jc with a fresh rebuild and blueprint 700 in receipts from tom papp was also sand blasted and painted same color as trailer. has an A impellor.

[mexrunner]

ttt