Or you could score yourself a set of '049' heads (casting #353049) off of eBay for pretty cheap. I got mine for $300 ($100 of that was shipping) and had the 2.19 intake and 1.88 exhaust valves installed in them.
For a cam, I'll be checking out the Isky cam kit from HTP.
are you installing these 049s on a genV or gen VI block? from what i am reading here, budnikjet has a gen V block. and as allready mentioned, the mark4 heads tend to leak when installed onto a gen V or VI block.
budnikjet. if you cant find anything close to you, i have a set of genV heads you can have for $50 + shipping. i think shipping would kill ya though.
what you want to look for is either the vortec 10141279 or 12560241 closed chamber oval port with 100cc chambers. or the 14097088 rec port open 118cc chamber heads. obviously with the 088s you will need to get a rec port intake.
Not to compete, but I have new, take-off gen 6 heads (934's), complete with all hardware, including pushrods, lifters, timing set and timing cover and cam, from a 502 Mag, if you want to stay OE. PM if you are interested.I would be interested in them. How does a person get a hold of ya?