Hi,
I'm in the process of capping my boat. In the pictures below you can see that the seam fit was very good to begin with from the factory. What I've done now is ground down into the seam most of the way through and layed it back on an approx. 45 degree angle. I've since ground up and down and am thinking I'm ready to begin to apply some glass and resin. My question is if any of you have any opinions of West Systems Epoxy resin. I was thinking this might be a nice use and with some 403 or 404 MicroFibers added to the resin.
Is there any draw backs with going with the epoxy versus the more conventional resins? I'm planning on painting the boat with a basecoat/clearcoat paint.
Thanks a bunch........John
http://i63.photobucket.com/albums/h1...k/IMG_6935.jpg