Poly-plastic hatch - where to buy

[Havasu1]

I have a refridgerator on my boat. One of those little ones and I never use it. I want to take it out and fabricate the space for storage. The problem I am running into is where to find a hatch/door that will cover the hole left behind by the refriderator. I have checked online and looked at the usual marine suppliers Westmarine etc but I can find one large enough to cover the hole. Not sure of the exact measurements but it is about 25"x25". Anyone know of a vendor that will build them custom sized? Any input? Thanks

[racecar.hotshoe]

http://i12.ebayimg.com/04/i/000/96/12/1513_1.JPG

[Havasu_Dreamin]

Anyone know of a vendor that will build them custom sized? Any input? Thanks
I would check with Wayne Earl (http://www.wayneearl.com/) as they supply just about all of the builders in So. Cal with their acrylic parts.

[Havasu1]

I would check with Wayne Earl (http://www.wayneearl.com/) as they supply just about all of the builders in So. Cal with their acrylic parts.
Wayne Earl it is! Thanks

[rrrr]

You can buy starboard at West Marine....it can be cut, edged, drilled or whatever to make a door for your ho.....
Starboard (http://www.westmarine.com/webapp/wcs...allpartial/0/0)

[hallett714]

I think starboard is the way to go. Also, sometimes called seaboard. It is made by two companies that I know of CPG Seaboard, and King Starboard. They make various colors and thickness' and is quite easy to work with using most common woodworking tools. I have bought a few sheets from this place: http://www.professionalplastics.com/...--Marine-Sheet
Hope this helps. Good luck.