Page 1 of 3 123 LastLast
Results 1 to 10 of 22

Thread: My Install is Finshed

  1. #1
    busybee2498
    My installs
    Clarion CMD5 Radio Receiver
    2 Clarion Remotes -1 at helm & 1 on swim platform
    6 Kicker KM620 Speakers
    2 Kicker Amps 2X200 & 2X350
    1 10" Kicker
    IPod Adapter (Black Box)
    Sirius Radio...
    Under Construction
    http://i144.photobucket.com/albums/r...8/_DSC0803.jpg
    http://i144.photobucket.com/albums/r...8/_DSC0800.jpg
    Bow Speakers
    http://i144.photobucket.com/albums/r...8/_DSC0846.jpg
    10" on left and one of 6 speakers on right
    http://i144.photobucket.com/albums/r...8/_DSC0874.jpg
    Amp & back of the 10" speaker
    http://i144.photobucket.com/albums/r...8/_DSC0848.jpg
    Radio in bathroom with Ipod hook up in bath room by cup holder
    http://i144.photobucket.com/albums/r...8/_DSC0864.jpg
    Swim Platform Remote
    http://i144.photobucket.com/albums/r...8/_DSC0822.jpg
    My Boat
    http://i144.photobucket.com/albums/r...8/_DSC0829.jpg

  2. #2
    RiverDave
    That looks good, but where is the box on the back of the sub?
    I think your going to find you will have a major rattle trap unless you do something back there?
    RD

  3. #3
    ROZ
    If your sub amp or deck has a subsonic filter....protect the sub and use it...

  4. #4
    busybee2498
    We thought at first we would have to built a box but found there is no rattle from the sub. It's in a pretty close box already. If i find later that it rattles I will have a box built...
    Thanks

  5. #5
    kcvega
    That sub is a CVR? With no box how does it sound?

  6. #6
    Phat Matt
    That speaker is not even made to run Free Air. Put a box on it. Does it sound muddy?

  7. #7
    busybee2498
    Yeah I going to put a box around that speaker.... Sounded good with music without alot of bass.... After I look at some of these post I checked out The sound in open space and really turned it up...... Sounds Good and very loud But the bass does drag a bit and rattle.....
    I'll give you guys an update in a few days after the box is installed...
    Thanks
    Benny
    That speaker is not even made to run Free Air. Put a box on it. Does it sound muddy?

  8. #8
    Hardly Satisfied
    looks good

  9. #9
    707dog
    clean install you doin it yourself? i wanted to use the area under my dash also for a woofer but on my boat it concaves to follow the dashline it would of took some serious fiberglass workas would of my porto-pottie area...so i use the storage locker under my sink and the small cubby under my wrap around 1 12" square kicker(sealed) on each side 4-6 1/2's and 4 6x9's...just wanted to share with ya..i would definitly box that 10 in you will notice a big difference keep us posted i like seeing other lil stereo projects..

  10. #10
    busybee2498
    Thank You
    Professionally installed.. Yeah I think Under My Sink would have been a better place for My sub.... I took it back to the shop and They are trying to Minimize the rattle. They don't believe the rattle is cause of the speaker being out of a box.... They think it is the Dash... That dash unscrews and lifts off.... The bass sounds good but like one of those old cars the truck rattles.... I'll let you know what Happens.
    http://i144.photobucket.com/albums/r...8/_DSC0816.jpg
    clean install you doin it yourself? i wanted to use the area under my dash also for a woofer but on my boat it concaves to follow the dashline it would of took some serious fiberglass workas would of my porto-pottie area...so i use the storage locker under my sink and the small cubby under my wrap around 1 12" square kicker(sealed) on each side 4-6 1/2's and 4 6x9's...just wanted to share with ya..i would definitly box that 10 in you will notice a big difference keep us posted i like seeing other lil stereo projects..

Page 1 of 3 123 LastLast

Similar Threads

  1. Well we finshed the Baja 1000
    By spectratoad in forum Sandbar
    Replies: 3
    Last Post: 11-15-2007, 09:15 PM
  2. MSD install
    By jetboat in forum Jet Boats
    Replies: 4
    Last Post: 08-20-2007, 05:44 PM
  3. CMI Install
    By Pro Max in forum Out Drive
    Replies: 16
    Last Post: 06-29-2006, 11:06 AM
  4. ARP install
    By Schiada76 in forum Gear Heads
    Replies: 22
    Last Post: 12-26-2005, 04:28 AM
  5. Finally finshed CV-21 and watershots
    By kingjason in forum Jet Boats
    Replies: 5
    Last Post: 03-26-2005, 09:21 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •