I am running an Accel 71000 Series Magnetic Breakerless Dist. with a Super Coil. From the way I read the instructions I bypass any original ballast resistor and run 12V straight to the coil and then straight from the coil to the Dist with 12V also. Is this correct or do I need the resistor before the coil. The reson I ask is that my coil died after no more than 4 hrs on it.
http://img443.imageshack.us/img443/467/scan0001dv8.jpg (http://imageshack.us)
Kind of hard to read but the top right corner is what I went by. (this is the Dist instructions)
http://img179.imageshack.us/img179/6821/scaneh1.jpg (http://imageshack.us)
Thanks