Bearing Buddy Bras are not being my buddy

[RitcheyRch]

Cheap and easy. Just like some of the girls have dated in the past.
ZIP TIES!!!!!
They will never come off

[funkcity]

Yes the small 1/8th" hole is good with a black zip tie wrap. Gotta let it breath and it will keep the grease off your wheels and tires.

[BigDogIvan]

Never had a problem falling off. I make sure there good a burped before any road trip. A couple shots of grease never hurts to help creat a vacume to hold them on.

[3 daytona`s]

You are a prize

Do not give him encouragement:idea:

[Rexone]

I've sliced a little cut with a razor knife in the past. Lets air pressure out but not grease and keeps water out too.

[Trailer Park Casanova]

I use the center caps that come with the wheels. Using a 3/4" hole saw, drill a hole in the center of the cap, then put a 3/4" plastic plug(Home Depot, Lowes) in it. Been doing that for years and never had a problem.
I'll take a pic tomorrow A.M. and post it.
Look sharp, feel sharp
~Bilge
Bearing buddie makes a cap for just that if I understand you correctly sir:
http://www.hotboatpics.com/pics/data...ix_025-med.jpg
http://www.hotboatpics.com/pics/data...ix_026-med.jpg
"Innie" Cap is held with Lip.
Some bearing buddie caps are "outties", some are "innies".
Our Speedster has the Innies.

[dumbandyoung]

You are a prize

HAHA!!
The zip ties DO work great, but what works even better are hose clamps, thats what I have on my trailer. Cost about $5 and you wont have to look back
..oh shucks! I gave out the secret.lol

[wright27]

Take them off and throw them away.....my trailer guy says they are just for looks, and they trap moisture inside....:idea:
He says.....throw them away!
Are you being serious?:idea:

[Desert Rat]

Take them off and throw them away.....my trailer guy says they are just for looks, and they trap moisture inside....:idea:
He says.....throw them away!
You have a trailer guy!!??
BALLER

[BigDogIvan]

I like that idea Bilge!! I take it you have Buddies and the cap covers them? I have the open center caps that would be used for a front axle of a 4x4 to get to the locking hubs. I hate them. There not round anymore and look like crap. Your idea is MUCH cleaner looking by far.