Page 2 of 4 FirstFirst 1234 LastLast
Results 11 to 20 of 32

Thread: Cleaning Polished Aluminum???

  1. #11
    Senior Member
    Join Date
    May 2009
    Posts
    1,143
    Wenol. That's some good shiznit.
    wenol red tube, then blue tube like 126 driver said works great.

  2. #12
    Highlimit9000
    Flitz metal polish is the best in my opinion...

  3. #13
    meaniam
    when i touch up my aluminum. i use mothers and steel wool. do it for a bit, then go back in and do it agian. but this time take it off with a rag

  4. #14
    AzMandella
    When it comes to quick detailing I use a solution of Simple Green and water(50-50).It works great at removing oil residue from blowby and any other oil leaks and then to polish two part Wenol.

  5. #15
    scottwizer
    I tend to like Wicked metal polish.... the alumag chrome works great for stuff that is very tarnished. I used to use Blue Magic... but I nearly wore my are off. Anyway here is the link Wicked Metal Polish (http://wickedproducts.com/wickedshop/scripts/)

  6. #16
    Cas
    Flitz metal polish is the best in my opinion...
    ditto!

  7. #17
    Junior Member Hud's Avatar
    Join Date
    Dec 2010
    Posts
    3,628
    http://www.zoops.com/zoopseal.asp This is what the Truckers use..........C'mon!

  8. #18
    SANGER-RICH
    OK here is my problem. When I painted my boat the motor was in the garage with it, I sprayed PPG CLV single stage. The motor was baged but I guess not enough. I have a thin film of overspray on the tunnelram and valve covers, this stuff sticks to everything, including my floor. Any ideas now??????????? :220v:

  9. #19
    Fiat48
    All I can think of is Lacquer thinner. But get other opinions first.

  10. #20
    77charger
    If all else fails go laquer thinner. you will just have to polish it again by hand but it will be really clean :rollside:

Page 2 of 4 FirstFirst 1234 LastLast

Similar Threads

  1. Cleaning out Aluminum Gas Tanks
    By 79TahitiCBB in forum Jet Boats
    Replies: 9
    Last Post: 02-15-2005, 06:38 PM
  2. Protecting Polished Aluminum?
    By P-Money in forum V-Drives
    Replies: 16
    Last Post: 01-31-2004, 03:48 PM
  3. Maintaining Polished aluminum?
    By Bryan Rose in forum Jet Boats
    Replies: 8
    Last Post: 07-27-2003, 06:18 PM
  4. Polished my aluminum heads
    By 126driver in forum Gear Heads
    Replies: 17
    Last Post: 05-23-2003, 08:19 AM
  5. Cleaning aluminum valve covers
    By Timer in forum Gear Heads
    Replies: 4
    Last Post: 05-08-2002, 04:35 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •