I know this has been covered many times,But just havent found the exact answers.
I want to spray gell on the inside of my boat on the floor.
I am looking to spay either just one solid color or a base color with some diffrent color stripes.
1.Can I body work the glass on the inside with a poly filler to fill in low spots,then spray gell over.If so does the body work need a primer before the gell?
2.how much should the gell be thinned with acetone?
3. how much catalyst should be used and is it the same catalyst as resin? is the amount ,the ratio ,the same as resin?
4.should a surfacing agent be mixed in to the gell to cure to a non tacky finnish?
5. should the gell be sanded before flowcoating?
6. On my ply wood floor, thewood will be seen .if i sand the layer of cloth that is on top will the flowcoat cover and blend back in ,the woven pattern of the cloth that is seen when sanded?
Thanks in advance for answers to my questions.....Hal