hey all,
just bought the boat so not sure about everything in the engine.... ford 460 bored .030 over with forged pistons, cam i am told is a ford racing 520 lift, carb is a holley 800 with 1" spacer plate, manifold is single plane edelbrock torker, ignition is a mallory electronic... so the problem im having is that it wont idle and coughs trough the rpm range... I adjusted the float bowl levels on the primary and secondarys they were off, its a tad better but still wont idle and does the same through the rpm range. I was told maybe the timing is a tooth off but not sure where to go from here. still learning about engines know the basics but not a huge amount passed that. any help is appricated!!