Results 1 to 5 of 5

Thread: Proppelor mercury 200xri

  1. #1
    phantom
    what proppelor must i use for a mercury 200xri on a phantom 21 feet??

  2. #2
    snappertapper
    how many rpm's do you want to turn? how heavy is your boat? i would try maybe a
    14 3/8 x 24 or 25 any more questions please feel free to email me at bigfish1229@aol.com

  3. #3
    Toffen
    Hi!
    I have a Phantom 25 w/Promax 300. I have seen many Phantom 21's and with a 200 HP it should run approx. 70 - 75 mph. What is your reccommended rpm and gear ratio? If the gears are 1:1.87 and max rpms approx. 6000, you should try a over hub Chopper II 26 inch prop or Tempest 26 A45 or Laser II 25/27. All props are high rake round ears for bow lift. Cleavers are not goot for your rig. Checkout also OMC SRX props (over hub).
    You should also get hold of a powerlift with 5-7 inch of setback for your bow heavy hull.
    Try also to rebalance your hull, get as much weight aft. Then you do not need so much positiv trim = more speed.
    Tou can email me at toffen@quart.no
    Cheers, Toffen G

  4. #4
    Toffen
    Hi!
    You could also try Merc ET props pending on how much you need of positiv trim.
    Cheers, Toffen G

  5. #5
    phantom
    Is a bravo 1 propellop 24pitch allright for this?? This is a standard outboard engine. And how fast will it go then???

Similar Threads

  1. 3.0 Mercury
    By RonHill in forum Outboards
    Replies: 10
    Last Post: 12-17-2006, 12:32 PM
  2. New Mercury 525 efi, BAD!!!!
    By hallett 260 in forum Sandbar
    Replies: 26
    Last Post: 04-22-2005, 01:06 PM
  3. Looking For A Mercury
    By sdpm in forum Outboards
    Replies: 6
    Last Post: 02-22-2005, 01:49 PM
  4. 260 HP MERCURY
    By ed bullock in forum Outboards
    Replies: 4
    Last Post: 05-12-2002, 07:41 PM
  5. Mercury 888
    By Russ in forum Out Drive
    Replies: 10
    Last Post: 04-06-2002, 08:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •