Results 1 to 4 of 4

Thread: Minimum water pressure

  1. #1
    teamnitro
    I have a 2001 Merc. 200 EFI. I need to know what is the minimum water pressure to watch for when running full throttle? I am trying to set up my jack plate and I need to know just how high I can go.

  2. #2
    Toffen
    Hi!
    10-12 psi minimum!
    Cheers, Toffen

  3. #3
    mrjetskey1
    here around houston as hot as it gets in summer i run at least 15 to 17 psi as it gets warm quickly at idle sorry im running 2.5 offshores but i believe it is same block.hope this helps .p.s. if you are in a cooler location 12 is o.k. later marvin

  4. #4
    teamnitro
    Well I wish I could say it was cooler. I live near San Antonio and fish mainly South Texas. Let's see...typical water temps in summer mid 80's to 90. Air temps upper 90's to over 100.
    At least we don't have quite the humidity you typically have in Houston.
    Thanks for the reply
    David

Similar Threads

  1. Water Pressure
    By LUVNLIFE in forum Cats & Tunnels
    Replies: 5
    Last Post: 02-22-2007, 04:55 PM
  2. Replies: 7
    Last Post: 06-26-2006, 05:50 AM
  3. Low water pressure from Jet
    By Nubbs in forum Jet Boats
    Replies: 3
    Last Post: 06-10-2005, 02:06 PM
  4. Water Pressure (Again)
    By Taylorman in forum Jet Boats
    Replies: 12
    Last Post: 04-01-2005, 07:37 AM
  5. Low water pressure
    By 737jetmech in forum Outboards
    Replies: 12
    Last Post: 05-10-2002, 05:49 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •