I have a 460 Ford engine, this what I am thinking to rebuild with 24cc dished pistons and stock cam:The M-6250-A460 Hydraulic Flat Tappet Cam = 0.493" Intake, 0.502" Exhaust and 216°@.050" Intake, 220°@.050 Exhaust.
I am going to do some minor porting on head and keep stock size valves.
The reason for the 24cc pistons is the compression ratio low to run unleaded gas. I have Edelbrock Torquer II Manifold that would clear my low engine cover.
Has anyone run a Torquer Maifold, I know that on 455 Oldsmobile quite a few people have run the Torquer Manifold.