Brian it looks like you will soon need a nice power plant to bolt in front of that intake.
It's kinda hot in here.:devil:
Brian it looks like you will soon need a nice power plant to bolt in front of that intake.
Come on mike, get that boat together already!
Brian it looks like you will soon need a nice power plant to bolt in front of that intake.
you are correct my friend ...
If it is a Circle Boat - Would not cutting off the Left Fin and Dropping the Intake deeper on the left hand side, or no would it be the Right fin and left drop or the right fin and right drop - Anyway there must be a way to help it load harder thru the turn. Man I have several of those intakes that need to be detailed out like your doing but the 100 bucks don't scare me as much as what the Beer outlay could be. Anyway A Good Setup to ya!
If it is a Circle Boat - Would not cutting off the Left Fin and Dropping the Intake deeper on the left hand side, or no would it be the Right fin and left drop or the right fin and right drop - Anyway there must be a way to help it load harder thru the turn.
So what is the secret recipe for intake modifications on circle boats?
So what is the secret recipe for intake modifications on circle boats?
Can't say much about the new days cause there ain't much R&D going on. But this is something they did in the past.
http://www.***boat.com/image_center/...pics_006_1.jpg
come on Mike ... I know you gotta have a better picture than that ...
Can't find a freshly graphited one, but this one pretty much spells it out better.:boxed:
http://www.***boat.com/image_center/...pics_016_1.jpg
thanks!
anything else?