Results 1 to 4 of 4

Thread: WTT full custom pit bike for BBC aftermarket exhaust

  1. #1
    frdvschvy
    Looking to trade a full custom pit bike for used or new BBC aftermarket exhaust. A set of lightnings would be first choice, but will consider others. I don't even want to think how much money has been sunk into this little bike. It is a hell of a lot of fun to ride (especially after to many beers ), but I have the itch to make the boat faster. Details of the bike below.
    TBolt Racing 124cc engine
    4spd manual heavy duty clutch
    Kitaco Racing Inner Rotor Ignition Kit
    Trail Bikes 24mm carb
    Intake port matched to head
    Head breather
    High volume oil cooler w/steel braided lines and chrome adapter plate
    Yoshimura TRS pipe
    Uni dual stage filter w/ custom outerwear
    Polished intake manifold
    Polished and modified ignition cover
    Pit King aluminum cam cover
    Pit King Chromoly frame
    ASV clutch lever
    Spider grips (very comfortable)
    Ishock (standard)
    Front forks re-worked with preload spacers & 15wt oil
    Two Brothers Racing peg mount
    Two Brothers Racing oversize pegs
    One industries graphics
    Billet gas tank cap
    12" front and rear wheels
    2.50X12 Starcross front tire
    80/100-12 Kenda Carlsbad Rear tire
    Includes 12" rear paddle for sand
    Includes 12" front and rear super moto tires (used only a couple times)
    http://i16.photobucket.com/albums/b1...rd/Misc024.jpg
    http://i16.photobucket.com/albums/b1...rd/Misc025.jpg
    http://i16.photobucket.com/albums/b1...rd/Misc023.jpg
    http://i16.photobucket.com/albums/b1...rd/Misc022.jpg

  2. #2
    Cole Trickle
    Looking to trade a full custom pit bike for used or new BBC aftermarket exhaust. A set of lightnings would be first choice, but will consider others. I don't even want to think how much money has been sunk into this little bike. It is a hell of a lot of fun to ride (especially after to many beers ), but I have the itch to make the boat faster. Details of the bike below.
    TBolt Racing 124cc engine
    4spd manual heavy duty clutch
    Kitaco Racing Inner Rotor Ignition Kit
    Trail Bikes 24mm carb
    Intake port matched to head
    Head breather
    High volume oil cooler w/steel braided lines and chrome adapter plate
    Yoshimura TRS pipe
    Uni dual stage filter w/ custom outerwear
    Polished intake manifold
    Polished and modified ignition cover
    Pit King aluminum cam cover
    Pit King Chromoly frame
    ASV clutch lever
    Spider grips (very comfortable)
    Ishock (standard)
    Front forks re-worked with preload spacers & 15wt oil
    Two Brothers Racing peg mount
    Two Brothers Racing oversize pegs
    One industries graphics
    Billet gas tank cap
    12" front and rear wheels
    2.50X12 Starcross front tire
    80/100-12 Kenda Carlsbad Rear tire
    Includes 12" rear paddle for sand
    Includes 12" front and rear super moto tires (used only a couple times)
    http://i16.photobucket.com/albums/b1...rd/Misc024.jpg
    http://i16.photobucket.com/albums/b1...rd/Misc025.jpg
    http://i16.photobucket.com/albums/b1...rd/Misc023.jpg
    http://i16.photobucket.com/albums/b1...rd/Misc022.jpg
    I have a buddy here at work that is currently shopping for one of these bikes and he wants to know what you would take for it?
    Shot me a PM with a figure so I can pass it along.
    Thanks
    Brandin

  3. #3
    Bobbo541
    what is the exhaust for i might have something i could always use another pit bike .

  4. #4
    frdvschvy
    what is the exhaust for i might have something i could always use another pit bike .
    Laveycraft XCS w/ 7.4 EFI

Similar Threads

  1. Full custom 2005 S/E rhino
    By 02HoWaRd26 in forum Parts 4 Sale
    Replies: 15
    Last Post: 09-23-2007, 11:48 PM
  2. Wanted: full suspension mountain bike...
    By Phat Daddy in forum Parts 4 Sale
    Replies: 24
    Last Post: 03-24-2007, 10:15 PM
  3. for sale...jamis full suspension mountain bike
    By W.O.T in forum Parts 4 Sale
    Replies: 6
    Last Post: 05-28-2006, 11:54 AM
  4. Aftermarket Exhaust Manifolds
    By CBLavey in forum Sandbar
    Replies: 12
    Last Post: 04-06-2004, 03:29 PM
  5. Aftermarket Exhaust
    By Ric 232 in forum Gear Heads
    Replies: 13
    Last Post: 09-22-2002, 07:39 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •