Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Powder Coat on a jet

  1. #1
    Ranz1
    How well does powder coating on a jet hold up? I heard that that its no good to strip the hardened surface on the aluminum eek! when they sand blast before powder coat? Whats that about? What about Jet-Hot( Jet hot site )? Got some pics? Anthony

  2. #2
    hack job
    Ranz1:
    How well does powder coating on a jet hold up? I heard that that its no good to strip the hardened surface on the aluminum eek! when they sand blast before powder coat? Whats that about? What about Jet-Hot( Jet hot site )? Got some pics? Anthony well when i did my bowl (powder caoted) i used a paint striper so i didnt remove the hard anadizing undre the many layer s of paint. then i snaded it smooth and pre cooked it for like a hour and a half to get all the gas bubbles and oil or what ever mighht be in the metal and i wen a head and pc 'ed it . here are some pics of mine.
    [img]http://www.***boat.com/image_center/data/500/36DSCN1893-med.JPG[/img]
    [img]http://www.***boat.com/image_center/data/500/36DSCN1898-med.JPG[/img]
    and some other stuff i have done
    [img]http://www.***boat.com/image_center/data/500/36Dscn1826.jpg[/img]
    every thing on my pump is powder coated and my rail kit (except for the rails) and gas caps and other stuff i love powder coating all my stuff . i do it my self so i save a ton on it. it lasts very well on pumps if done right! wink

  3. #3
    LVjetboy
    Nice job Tyson!

  4. #4
    hack job
    LVjetboy:
    Nice job Tyson! thanks ! wink

  5. #5
    Jake W
    Tyson what color is that blue it kinda looks tranparent did you have to put a silver base under neath it?Looks nice can you post a pic of the rail kit since it is a Ford making my own and would like to see as maney as posible for ideas and alt location.
    Thanks Jake

  6. #6
    cyclone
    i had my bowl, diverter nozzle, rail kit and other hardware done and its held up great. [img]http://www.***boat.com/image_center/data/500/45IMG_0266-med.JPG[/img]

  7. #7
    hack job
    Jake W:
    Tyson what color is that blue it kinda looks tranparent did you have to put a silver base under neath it?Looks nice can you post a pic of the rail kit since it is a Ford making my own and would like to see as maney as posible for ideas and alt location.
    Thanks Jake jake i will see is i can find any other pics of it . if not ill take some. as for the blue it is transparent and should be used on polished or cromwed parts ( i have used a powder undernieth it called almost crome and it turns out pretty damn good, my motor plates are done up that way)
    [img]http://www.***boat.com/image_center/data/520/36DSCN2092-med.JPG[/img]
    [img]http://www.***boat.com/image_center/data/520/36DSCN2098-med.JPG[/img]
    [img]http://www.***boat.com/image_center/data/520/36DSCN2080-med.JPG[/img]
    [ September 28, 2003, 06:31 PM: Message edited by: hack job ]

  8. #8
    Jake W
    Tyson very clean thanks for the pics. jawdrop
    Jake

  9. #9
    Senior Member
    Join Date
    Apr 2010
    Posts
    6,425
    I swear this thread was up about a week ago. Anyway i say paint it. heres mine...I used polyeurethane paint for it,its color matched to a new place diverter so i could add one without any painting hassles. Good luck.
    [img]http://www.***boat.com/image_center/data/521/409Dcp00468-med.jpg[/img]
    [img]http://www.***boat.com/image_center/data/521/409Dcp00470-med.jpg[/img]

  10. #10
    Senior Member
    Join Date
    Feb 2009
    Posts
    3,387
    painting looks just like powdercoat but a turdload cheaper and besides, whoever has their pump powdercoated needs to inform the knucklehead behind the counter that the tape covering all of the areas with holes or clearences needs to do w/out powdercoating!! i know of a few peops that have had this happen to them incl. me!!! removing powdercoating from threading is a "BIATCH" just my "BUCK-O-FIVE"

Page 1 of 2 12 LastLast

Similar Threads

  1. Powder coat removal<<<<<<<<>>>>>>>>>
    By Not So Fast in forum Sandbar
    Replies: 6
    Last Post: 05-14-2007, 06:04 AM
  2. Powder coat?
    By Never Satisfied in forum Sandbar
    Replies: 7
    Last Post: 05-11-2007, 02:20 PM
  3. powder coat zoomies?
    By FlatRat in forum V-Drives
    Replies: 9
    Last Post: 01-23-2007, 02:54 AM
  4. powder coat vs chrome????
    By mickeyfinn in forum V-Drives
    Replies: 18
    Last Post: 03-26-2003, 07:12 AM
  5. Hot Coat (Powder Coat) at home
    By mcshriver in forum Jet Boats
    Replies: 17
    Last Post: 01-27-2003, 12:48 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •