Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Merc. 2.5 Compression??

  1. #1
    Run_em_Hard
    What compression numbers would be good from these motors???

  2. #2
    Tom Brown
    260? 280? What?

  3. #3
    Run_em_Hard
    I do believe that they are the 260's.

  4. #4
    Towndrunk
    For a stock motor? 120-140. They should all be close to each other and in no
    case further apart than 15 percent of the highest number.

  5. #5
    Run_em_Hard
    Thanks...

  6. #6
    Tom Brown
    My 260 puts out 125 on all holes with 37cc heads.

  7. #7
    Run_em_Hard
    For twins 142-145 on port, and 135 all on starboard. Sound good?

  8. #8
    Towndrunk
    I have run into the starboard side being about 10 lbs higher. Not sure why but it hasn't hurt anything yet. I just checked mine and it's between 200 and 210 all around.

  9. #9
    You Te
    I have run into the starboard side being about 10 lbs higher. Not sure why but it hasn't hurt anything yet. I just checked mine and it's between 200 and 210 all around.
    Sounds like 21 to 23 cc heads to me.

  10. #10
    Towndrunk
    I didn't say it was stock!! Hey, how much meth do you go thru in a weekend?
    I'm having a hell of a time finding it over here and I have a function this weekend. Will 3 gallons get me thru 10 or so runs?

Page 1 of 2 12 LastLast

Similar Threads

  1. Compression
    By 76 Bonneville in forum Jet Boats
    Replies: 7
    Last Post: 10-28-2007, 08:07 AM
  2. Fuel Consumption: Merc 469HO vs. Merc 525
    By Magic34 in forum Sandbar
    Replies: 38
    Last Post: 10-22-2007, 02:48 PM
  3. Help with DVD compression
    By Boozer in forum Sandbar
    Replies: 2
    Last Post: 05-08-2007, 10:28 AM
  4. Compression
    By CBadDad in forum Gear Heads
    Replies: 16
    Last Post: 05-19-2006, 06:11 AM
  5. compression??
    By bakerjet in forum Jet Boats
    Replies: 4
    Last Post: 02-10-2005, 10:25 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •