here's a core out of a gale ganks unit.
dave check out industrial liquidators there in lawndale or hawthorne they have cores in there some times and if they dont they might be able to lead you in the right direction! oh they are in the building with ealrs plumbing i think you know were they are!
good luck! wink
here's a core out of a gale ganks unit.
opps can't figure ot how to get pic in it's in readers rides under v-drives
(img)http://free.***boat.net/cgi-bin/imageFolio.cgi?action=view&link=Reader_Rides/V-Drives&image=intercooler2.JPG&img=12&tt=(img)
R, You need to use these keys "[ ]", not "( )". wink
On the 2nd one use [/img].
![]()
And this is the URL address : http://free.***boat.net/gallery/Read...tercooler2.JPG
[ November 02, 2002, 01:30 PM: Message edited by: MikeF ]
http://free.***boat.net/gallery/Read...tercooler2.JPG .
[ November 02, 2002, 03:05 PM: Message edited by: Clown ]
[img]http://free.***boat.net/gallery/Reader_Rides/V-Drives/intercooler2.JPG[/img]
Clown, yours would have worked except for the space between JPG and [/img}
I have a home made superchiller and blew the core at chowcilla this year it cost me $300 for a new updated core assy. custom made to my specs.
T-Bag:
I have a home made superchiller and blew the core at chowcilla this year it cost me $300 for a new updated core assy. custom made to my specs.That's what I'm wanting to hear. Who made that core and can you post some contact info.
My superchiller only has a 3" core. I would like the use a much thicker one of the turbo deal.
[ November 02, 2002, 08:06 PM: Message edited by: superdave013 ]