call hilborn i think you can just get new nozzles you wont need a pump just more fuel thru the bypass??
I have a Hillborn number one pump and 21a nozzles that are way to big for my application, according to Rons the pump is good for 1000-1200 hp alc or gas the nozzles are for around 800-900 hp. I need a pump and nozzles for 600-700 hp running on gas. I would love to trade what I have or will sell them and buy what I need. the pump has been flowed and tagged by Rons and is fine. Please give me a holler if you have what I need or are interested in the goodies I have.
Thanks
John
520-275-8441
call hilborn i think you can just get new nozzles you wont need a pump just more fuel thru the bypass??
Dos, you are right, you can run more through the bypasses however it narrows your tuning window according to the guys at Rons. The Hillborn number one pump is almost twice what I need, i forget the flow numbers but they were big! dont you need a big pump for your alky motors? Thanks for the input all responses are welcome.
John
LD,
I have a hilborn 150, This is the same as the Enderle #1.
Should be around 6.9 GPM.
Are you saying you need an -0 or .5 pump ???
What is your application?
Are you going to race it?
I have a hilborn 150
whats up Kid?
LD,
I have a hilborn 150, This is the same as the Enderle #1.
Should be around 6.9 GPM.
Are you saying you need an -0 or .5 pump ???
What is your application?
Hilborn 150 pumps come in more then one size. I have a Hilborn 150-#1 that's the largest. What dash # do you have? They come in #00, #0, #S0, #1/2, #1.
whats up Kid?
I have a Hillborn number one pump and 21a nozzles that are way to big for my application, according to Rons the pump is good for 1000-1200 hp alc or gas the nozzles are for around 800-900 hp. I need a pump and nozzles for 600-700 hp running on gas. I would love to trade what I have or will sell them and buy what I need. the pump has been flowed and tagged by Rons and is fine. Please give me a holler if you have what I need or are interested in the goodies I have.
Thanks
John
520-275-8441
John, are you going to use a Hilborn pump??.. If you get an Enderle you need the #0, that's what I have, the #1 is for a blown deal, if you find a Crower, make sure it's an F1!..!..
My Hilborn is a marked 150A