well i had planned on runnin the blower/nitrous cam i have from comp since it'd be nice to use the same springs(that have less than 10hrs on em).the cam doesn't need crazy seat pressure(only needs 155lbs seat, 450open, i set them at 170lbs seat, @500 open). i ran it thru the dd and comp cams programs and its falling way short of my goal. trying to get as much hp and tq at 6500 as possible, let the big nitrous take over from there. am i bangin my head on the wall trying to get 775-800hp with a nitrous cam with less than 700 lift? current cam is a 114 center, 652 matched lift, i 252 e262, comp roller. can't make it do more than 750hp on either dyno program. i know the programs aren't right, but if i could get 800+hp, and still fall short with 760-770hp i'd be happy.
quik run down on the 505:
single plane dominator victor
1050 dominator (flow 1150+cfm)
procomp bbc 320cc heads
13 to 1 je's
eagle h-beams with l19's
eagle forged crank
je nitrous rings(gonna do a big gap, plan on using alot of nitrous)
i can't find real world flow numbers on the procomps, all i could find where these:
0.200" Lift
171.09 cfm
0.300" Lift
254.44 cfm
0.400" Lift
321.91 cfm
0.500" Lift
357.53 cfm
0.600" Lift
377.37 cfm
0.700" Lift
390.03 cfm
0.200" Lift
123.31 cfm
0.300" Lift
167.20 cfm
0.400" Lift
205.73 cfm
0.500" Lift
241.59 cfm
0.600" Lift
261.88 cfm
0.700" Lift
279.57 cfm
not the greatest but better than cast heads what's a good nitrous or na cam that'd get me closer to 800hp? anybody runnin close to that number with 990's?? a 4-500.00 custom grind is outta the question or i'd be ordering from straub already