The first shot shows the old steering gone, and I have marked the postion of the new mounting plate and drilled the new mounting holes.
http://www.***boat.com/image_center/...896wheels1.jpg
I wanted to move the centerline of the helm for 2 reasons. Originally, it wasn't centered with the seat, and the curve of the dash on the left was too great.
http://www.***boat.com/image_center/.../896wheel2.jpg
This shot shows 2 things:
1) I didn't want the bezel above the break in the dash. This required lowering it a little from the original.
2) The material that needs to be cut out with the jig saw.
http://www.***boat.com/image_center/.../896wheel3.jpg
It's a little hard to see, but the gel coat under the old bezel was a brighter yellow, so I didn't want to move it too far to the right