Billy, great info/suggestion thanks. I feel better that the black is all the way through, I'll gid a little deeper.
What the pic don't show is a orange pinstripe next to the black, so I'll have to be careful not to burn that off...as the haze is right next to it.
PS. Also, any product/compond you could suggest that cuts good with a wool buffer in general that acts as a color restore vs doing a light full wet color sand on the boat, then to be followed with a polish and wax?You can try 3M super duty rubbing compound followed by Finesse It 2, or Black Ebony with a polishing pad, preferably a foam pad ( black pad ) on the polishing. I'll tell you another thing to try...Meguiars Tech1 wax. Goes on easy and you can apply it to the hole boat at once and then remove. Leaves it super glossy and the wax fills minor surface scratches even on black. I use it on my flat bottom and my black crew cab and love the way it works. Now I have also used it on several jobs we've painted and if you want to get really anal you can go over the job with a quick detail spray and wipe off again and that leaves the surface super, especially the dark colors.