Change the JC bowl to a JG bowl (they're interchangable)...the JG bowl is a split bowl so you can mount a droop on it.
the pump for my sleekcraft is a 12JC with an A impeller.... what mods, if any, can be done to put a droop snoot on this thing?
Change the JC bowl to a JG bowl (they're interchangable)...the JG bowl is a split bowl so you can mount a droop on it.
bigkev77 A lot more info here about your boat (as much as you can provide) would help everyone but... its been our experience that Older Sleeks with thier bottom design don't seem to respond well to droops(which in your case would require a bowl change). Trim Diverters are a huge help however... Post up more and the guys can help you Tom
bigkev77 A lot more info here about your boat (as much as you can provide) would help everyone but... its been our experience that Older Sleeks with thier bottom design don't seem to respond well to droops(which in your case would require a bowl change). Trim Diverters are a huge help however... Post up more and the guys can help you Tom
Don't mean to jack a thread, but would a droop on a '73 18' Sleekcraft help either?
its an 18' 1976 sleekcraft rebel, originally had a 455, but currently building a 460 for it. i'll try and post some pics as soon as i get home and get the chance.
Its hard to really tell IMO its a cheap and easy experiment to try Tom
ps waiting to see the pics
Its hard to really tell IMO its a cheap and easy experiment to try Tom
ps waiting to see the pics
What do you need pics of Tom?
Hey Tom would a hull like this possibly benefit from a droop? It's around 500hp and a Jacuzzi B impeller
http://i18.tinypic.com/689k0g1.jpg
well here she is... got a lot of work ahead of me, but its all gonna be worth it!
the sticker is a little faded, but on the left rear corner of the transom is the original dealer sticker. still tryin to figure a way to keep that on the boat and restore that too.
So a droop good or no on this kind of boat?