View Full Version : Any ford mech's here?
racecar.hotshoe
02-14-2005, 04:17 PM
I have a 2000 ford excursion with door lock elect problems.they dont lock or unlock with the door bottons or the key pad?Help
check the fuse under the hood my f 350 did that you will need to look in the book for the right one
racecar.hotshoe
02-14-2005, 04:26 PM
check the fuse under the hood my f 350 did that you will need to look in the book for the right one
It tries to go up and down but only makes it half way!
okay then it might be the lock motor getting weak i'm not a mech. tech just thing's that have happen to me ...
dicudmore
02-14-2005, 04:47 PM
the answer above sounds like a winner....
you be needin' a new actuator there sir :wink:
riverbound
02-14-2005, 04:52 PM
It is the actuator, it is a very common problem on those trucks usually its only the rear doors though. Mine has the same problem I just havent gotten around to fixing it yet.
riverbound
02-14-2005, 04:54 PM
Also if you want them replaced it will be MUCH cheaper to go to a stereo shop and have them put aftermarket actuators in. If you are close I would recommend AL&Eds in Ontario, ask for Dave (parker) and he will get you set up.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.