PDA

View Full Version : selling C heads



montrone
06-28-2001, 09:10 AM
any body interested in buying C heads, recently beadblasted.
all parts included, valves, springs, shims etc.

rmclague
06-28-2001, 12:03 PM
Yes
I am interested
Give me a price I am trying to decide between a good built set of C heads and a set of aluminum edelbrock heads.
The Edelbrock a ridiculously high but they are bad to the bone.
Anyway shoot me some numbers and maybe we can deal.
Rob
Originally posted by montrone:
any body interested in buying C heads, recently beadblasted.
all parts included, valves, springs, shims etc.

Squirtcha?
06-28-2001, 04:20 PM
I assume you mean BBF DOVE C heads? I have a buddy that would be interested depending on the $. My email address is in my profile, or you could just respond here.
Thanks

Oldsquirt
06-28-2001, 04:55 PM
Sorry, Squirtcha? but C heads are the Olds owners Holy Grail.
Craig

Jim
06-28-2001, 09:11 PM
BBf DOVE heads, $250.00, orig used cond. Jim Brock

montrone
06-29-2001, 11:55 AM
i bought them off of e-bay for $500...
looking around $300 (+ or -) .....where do the people who are interested live?
these heads are for the olds engine, joe mondello's reconmended heads for this engine.

GL360
06-29-2001, 12:13 PM
I'm getting out of the Olds game little and I have a couple sets of C heads I'll let go reasonably. Both sets are complete and will need rebuilding but are good cores.
To buyers of C heads, be aware the heads off a 2-barrel engine have smaller intake valves but can be opened up to the 4-barrel intake valve size (2.072"). Also, Mondello recommends 1.680" exhaust valve when hardened seats are installed (a 'must' with unleaded gas)rather than the 1.710" commonly available.
I also have a good used (under 40 hours)set of K (marine) heads that have been ported, polished, heat riser filled, center exhaust port divider welded, etc. I've thought about using them to build a spare motor, but I'll let them go for the right price.
[This message has been edited by GL360 (edited June 29, 2001).]

Squirtcha?
06-29-2001, 08:31 PM
Sorry totally don't know Olds stuff.