Shockwavebob

[ROZ]

I like your speaker pods, but be sure to make enclosures for the woofers....Both sealed at 30 litres....

[TOBTEK]

I like your speaker pods, but be sure to make enclosures for the woofers....Both sealed at 30 litres....
did he send you pics? I just got a set to my TOBTEK address. Pretty sweet work so far! :D

[ROZ]

They're in the image center...

[TOBTEK]

They're in the image center...
ahhhhhhhhhh :wink: If your in the neighborhood this weekend, stop in and have a cold one on me! :)

[Riverkid]

How's the glasswork coming?

[ROZ]

Isn't that like a cube for both? Damn, time to call DCB for some additional info. :D
I meant to say that each woofer is 30 litres .... DC who? :D

[TOBTEK]

Finished both front pod assemblies today and just finished covering one of them. I'm getting ready to resin it right now.
Jon......snap some pics along the way for me PLEASE :rollside:

[h2oski2fast]

Next time use fleece or sweat shirt material. Much easier to work with than grill cloth.

[TOBTEK]

I made these with fleece last week.
http://www.clubwerks.com/river/100_0172.jpg
those look SWEET! My brother is bringing his rail up next week (yellow SCU LS6) MAKE SURE HE DOESN'T PUSS OUT! he NEED's atleast a 10" sub and many FO-CAL K2's.....and all in custom glass work OFCOURSE :rollside:

[TOBTEK]

jon.............what does the rear clusters look like? Enquiring minds want to know.

[ROZ]

Too thick. That's three separate speaker rings on different planes. You have to see it to understand the setup. The grill cloth will give me the basic shape so that I can glass on top. I would have lost a lot of detail with fleece.
Not too thick or lost detail if you would have accounted for it when you mounted the rings together :D
The only thing about using grill cloth is that you end up with much more finish work on the outside of the panel. Fleece would have been pretty much finish work on top with structural support added to the back of the panel...
You working at WFS now? :D

[Flashover]

Bobs got skilzzzz.. Looks real good. Can't wait to see a pic of them in the boat. :D :D

[riverbound]

Next time use fleece or sweat shirt material. Much easier to work with than grill cloth.
I would have used fleece also...but Im not a big fan of all the finish work required with using grill cloth. :idea:
Looks good SWB. :D

[TOBTEK]

We get the big bucks for our finish work. :D
If you had seen Toby's requirements for mounting these, you'd have squeezed them together too.
Toby, I'm getting ready to start the rear today, give me a call when you have a chance.
whata talking about? im soooooo easy to please. Just make them perfect and exactly like I stated :)

[Cole Trickle]

Pods look good!
Can't wait to see the final results.
<----- needs to make a pod for 2 6x9's soon :hammer2:

[ROZ]

We get the big bucks for our finish work. :D
So is Jim going to paint them or is Toby having Alex paint them?

[TOBTEK]

MORE PIC'S JOH........GEEEZE :( ............. :D

[Riverkid]

Got a Jones going on... :rollside: Let's see those pics SWB!

[Tom Brown]

Looks good, John. :cool:

[TOBTEK]

new pics??????? are they done yet???? getting call's from Elcajon asking for parts :squiggle: :D fill a brother in................. :boxed:

[riverroyal]

you there tommorrow?Im driving thru temecula to pick up my trailer,I may need to stop by!

[HM]

I made these with fleece last week.
http://www.clubwerks.com/river/100_0172.jpg
My neighbor has the exact same setup! Imagine that! :D

[HM]

You might want to avoid going over there tonight, he's not in a very good mood. :D
I try not to bother him. I have only gone over a couple times to check out the toys. My wife keeps telling me not to get any bright ideas! I agree with her, and assure her I will just work on dumb ideas. :D

[TOBTEK]

You know it, I'm there everyday. Stop on by, we can do some donuts in Toby's Rhino. :D
IF YOU GET ANY BITS ON THE RHINO.....SELL IT! I NEED SOME $$$$ FOR A POOL, I WAS HOPING MY WIFE WOULD GIVE UP ON THE IDEA...NO CHANCE :frown: ANYTHING OVER 25K IS ALL YOURS :D

[mbrown2]

IF YOU GET ANY BITS ON THE RHINO.....SELL IT! I NEED SOME $$$$ FOR A POOL, I WAS HOPING MY WIFE WOULD GIVE UP ON THE IDEA...NO CHANCE :frown: ANYTHING OVER 25K IS ALL YOURS :D
I thought all this mindless Rhino spending was disposable income....? :)
Is the Rhino on an HELOC? j/k :)

[TOBTEK]

I thought all this mindless Rhino spending was disposable income....? :)
Is the Rhino on an HELOC? j/k :)
its not disposable income thats for sure! but not on the home either ;) I think mikey is in the market for a rhino, he's just not eluding to the fact :D You should get one.....gonna be alot of fun! :D :D

[riverroyal]

IF YOU GET ANY BITS ON THE RHINO.....SELL IT! I NEED SOME $$$$ FOR A POOL, I WAS HOPING MY WIFE WOULD GIVE UP ON THE IDEA...NO CHANCE :frown: ANYTHING OVER 25K IS ALL YOURS :D
its never even seen dirt,a pool!!!

[mbrown2]

its not disposable income thats for sure! but not on the home either ;) I think mikey is in the market for a rhino, he's just not eluding to the fact :D You should get one.....gonna be alot of fun! :D :D
I would, but my wife has got me on spending lock down these days...:)...maybe in a yr or so, I am going to look into the long travel thing....but for now my EZGo Sport Turf does just fine to haul around drunks at the river.....Here is my Rhino:) Locked and Ready for Rocks...:)
http://www2.***boat.com/image_center/data/520/17Photo_34-640.JPG

[mbrown2]

I would, but my wife has got me on spending lock down these days...:)...maybe in a yr or so, I am going to look into the long travel thing....but for now my EZGo Sport Turf does just fine to haul around drunks at the river.....Here is my Rhino:) Locked and Ready for Rocks...:)
http://images.kodakgallery.com/photos1533/3/40/9/79/12/9/912790940303_0_ALB.jpg
Fn Red X....guess I can't link from there...I will post it when I get home...dam image gallery is blocked at work.

[TOBTEK]

JON......am I picking up the side pod's a White Rhino tomorrow? call me.....PLEASE. you have my cell right?

[TOBTEK]

As far as I know, your pods will be ready tomorrow. They're just about done. Bring your checkbook is what Adam said. ;)
WHERES ALL THE PIC'S?????? WHAT TIME IS SAFE TO COME UP? AND ARE THEY PAINT READY?

[TOBTEK]

jon.........let me know when your coming down this way, and I'll try to meet you half way. Dont want to have you drive all the way down here. Its not like I had anything better to do yesterday from 2:30-7pm :hammer2: :D just bustin your balls.....I can see thouse were a TON of work, and they look awesome! ( just because I did the final sanding in a Nordstrom suit :confused: ) I was thinking though......is the fiberglass the way to go for the boxes? shouldn't they be made from MDF???? Just curious?

[TOBTEK]

HERES THE AFTER "WIRED 4 SOUND" GLASS JOB...AND BEFORE THE "AP DESIGNS" PAINT..........THANKS JON,
http://www2.***boat.com/image_center/data/500/135F26_CONSTRUCTION_PODS_3-med.jpg
http://www2.***boat.com/image_center/data/500/135F26_CONSTRUCTION_PODS_4-med.jpg
http://www2.***boat.com/image_center/data/500/135F26_CONSTRUCTION_PODS_1-med.jpg
http://www2.***boat.com/image_center/data/500/135F26_CONSTRUCTION_PODS_6-med.jpg

[Riverkid]

Nice work SWB. Those came out really nice.

[ROZ]

Good looking work there, John!

[syke-o]

damn those look nice... and thats even before paint... sorry for sounding ignorant, but whats the going rate per/hr for that kind of stuff??? :confused:

[ROZ]

What tobtek paid was about $4.50/hour. :D
PM sent.
Sounds like you under bid :D

[TOBTEK]

damn those look nice... and thats even before paint... sorry for sounding ignorant, but whats the going rate per/hr for that kind of stuff??? :confused:
about half the price of a 2006 DCB F26 :eek: :2purples:

[syke-o]

What tobtek paid was about $4.50/hour. :D
PM sent.
wow... toby sure knows how to grind people down pretty good... he needs to teach a class on it :)

[TOBTEK]

That's just hurtful. :D
Did you get my fax? We need a loan application to start on the Rhino. :p J/K, I sent a new drawing of the sub enclosure over to you.
DIDN'T get it....I was out of the ofiice. How was my drawlings? did you understand them?......is the rhino done yet???? :) ALBA needs it for a show the first of Dec.... :squiggle: not much time for paint work.....

[mbrown2]

Nice side consoles.....those are extremely trick.....I wonder how long before DCB splashes them and they become standard. Awesome work...and the system will sound a ton better.

[ROZ]

Not so much a question, but THERE'S NO WAY I'm putting the Stinger connectors on top of that Odyssey in the billet DCB bracket. There's like 1/8" clearance from the bracket and they don't fit that well. I'll use round head allens.
Is the billet piece powdercoated as powder coatings are notconductive...

[TOBTEK]

joh......any pics of the rhino enclosers?

[TOBTEK]

are they done yet??????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ?????????????????????????????????????????????????? ??????????????????