PDA

View Full Version : SS Ball Mount


rsr
06-20-2006, 09:05 AM
I've checked all the usual spots, no luck in finding a 5-inch drop stainless steel ball mount for the hitch. Anyone have any ideas - would prefer to go stainless vs. chrome, but if no stainless any ideas for chrome? Thanks in advance for any and all help.
Caribbean Jet
06-20-2006, 09:12 AM
Most custom lift shops hav them, granted you might pay a bit more.
Jyruiz
06-20-2006, 09:21 AM
I have seen the aircraft aluminum alloy ones which is suppose to be 30% stronger, check it out.
http://www.everythingoffroad.com/index.htm?itemam35xx.html
Run_em_Hard
06-20-2006, 09:35 AM
Ebay...they are on there and at decent prices also.
HM
06-20-2006, 09:36 AM
Where do you get the billet adjustable ones at? Or even just adjustable?
Run_em_Hard
06-20-2006, 09:38 AM
Where do you get the billet adjustable ones at? Or even just adjustable?
Ebay.
Jyruiz
06-20-2006, 09:41 AM
Where do you get the billet adjustable ones at? Or even just adjustable?
You can also get them here,
http://www.everythingoffroad.com/index.htm?itemam35xx.html
I have never purchased from them though, so buy at your own risk.
onesloryd
06-20-2006, 10:07 AM
How much weight are you planning on towing? I would stay away from the aluminum drops I have seem a couple of these bent.
Run_em_Hard
06-20-2006, 10:14 AM
How much weight are you planning on towing? I would stay away from the aluminum drops I have seem a couple of these bent.
The aluminum hitchs have a higher tow rating...if you exceed the rating any hitch will break or bend.
redi4fun
06-20-2006, 10:41 AM
Where do you get the billet adjustable ones at? Or even just adjustable?
I got one from this place, it got to me in like 3days. Was really fast to ship the hitch. No problems
redi4fun
06-20-2006, 10:42 AM
Where do you get the billet adjustable ones at? Or even just adjustable?
I got one from this place, it got to me in like 3days. Was really fast to ship the hitch. No problems
http://cgi.ebay.com/ebaymotors/RAPID-HITCH-ADJUSTABLE-TRAILER-HITCH-2-X-2-5-16-BALLS_W0QQcmdZViewItemQQcategoryZ33653QQitemZ80766 80857QQrdZ1QQsspagenameZWDVW
rsr
06-20-2006, 12:36 PM
Thanks for everyone's help - just placed order for the alumastringer 6 inch drop - hopefully have it here by this weekend. Thanks again.
No Name
06-20-2006, 01:06 PM
Ebay...they are on there and at decent prices also.
Ebay has been very very good to me. :rollside: