PDA

View Full Version : Portable Stripper Stages???



NOTALENT
01-23-2006, 11:36 AM
Alright...Who's go the hook up's??? Any Idea's???

Kilrtoy
01-23-2006, 11:38 AM
those are nice but put a girl 140ish on it and they swing, as if they are gonna fall over. Can be scary.....
I have seen your talent and they are not even close to that weight

NOTALENT
01-23-2006, 11:40 AM
Haha..imagine that...lol :rollside: We have a few New club's Im starting up, and one of the thing's I want to start is a Stripper Pole Competition. Toss the winner a $100bucks... :crossx: I will have to set a weight limit.... :cry:

MAINEVENT
01-23-2006, 11:43 AM
Alright...Who's go the hook up's??? Any Idea's???
I would just make one and add one of those portable poles down the middle of the box... the portable poles work great we used to have one or i should say me ex has one now :rolleyes:
Damn what kilr trying to tell you??????? :idea: LOL

MAINEVENT
01-23-2006, 11:44 AM
Haha..imagine that...lol :rollside: We have a few New club's Im starting up, and one of the thing's I want to start is a Stripper Pole Competition. Toss the winner a $100bucks... :crossx: I will have to set a weight limit.... :cry:
100 bucks....... Probably gonna get some focked up talent up their for a bill.... lol Good luck bro

HOOTER SLED-
01-23-2006, 11:44 AM
I've been thinking about this for my patio. :devil:

hoolign
01-23-2006, 11:45 AM
What is a portable stripper? :rolleyes:

MAINEVENT
01-23-2006, 11:45 AM
I've been thinking about this for my patio. :devil:
If i build it they shall dance :crossx:

HOOTER SLED-
01-23-2006, 11:46 AM
If i build it they shall dance :crossx:
Indeed. :crossx:

NOTALENT
01-23-2006, 11:47 AM
100 bucks....... Probably gonna get some focked up talent up their for a bill.... lol Good luck bro
No way....we do wet t shirt contests pay the girls 25bucks...and we always have around 20 contestants...They dont care about the money...just the attention. :crossx:

MAINEVENT
01-23-2006, 11:48 AM
No way....we do wet t shirt contests pay the girls 25bucks...and we always have around 20 contestants...They dont care about the money...just the attention. :crossx:
Yeah i guess your right Dumb broads and Booze makes for good partying LOL Fock it when's the first gig.......

NOTALENT
01-23-2006, 11:52 AM
Yeah i guess your right Dumb broads and Booze makes for good partying LOL Fock it when's the first gig.......
The first night were doing is unfortunatley Feb.17th..@ Khourys Rest. Here in LB. Unleashed Clothing is one of our sponsors and Deano is also going to be bringing his Models...well Deano had to be somewhere...so he is sending them for me to look after... :crossx:
I will be finishing of the flyers tonight...my buddy screwed on the spelling so I only have the rough draft...I will post them when Im done.

HOOTER SLED-
01-23-2006, 11:53 AM
Yeah i guess your right Dumb broads and Booze makes for good partying LOL Fock it when's the first gig.......
A dartboard, a plasma, and a pole. These will complete my patio. :crossx:

NOTALENT
01-23-2006, 11:56 AM
A dartboard, a plasma, and a pole. These will complete my patio. :crossx:
You forgot the Jagermachine, and the kegerator!!! :crossx:

HOOTER SLED-
01-23-2006, 12:00 PM
You forgot the Jagermachine, and the kegerator!!! :crossx:
True true. I'll just mix the Jaiger bombs. And the ONLY reason why I don't get a kegerator, is because I'll drink that shit waayy too much!! :crossx: As a matter of fact, the fridge I have in my garage was gonna be turned into one. :devil:

Mr. Pixilated
01-23-2006, 12:22 PM
True true. I'll just mix the Jaiger bombs. And the ONLY reason why I don't get a kegerator, is because I'll drink that shit waayy too much!! :crossx: As a matter of fact, the fridge I have in my garage was gonna be turned into one. :devil:
Don't forget a rubber despencer for when Main comes over and uses your pool table.....You gotta stop him from doing that, it keeps peeps away.

AZJD
01-23-2006, 12:27 PM
Alright...Who's go the hook up's??? Any Idea's???
www.pimpdaddy.com

HOOTER SLED-
01-23-2006, 12:28 PM
Don't forget a rubber despencer for when Main comes over and uses your pool table.....You gotta stop him from doing that, it keeps peeps away.
LOL....The pool table has secret powers!!!!!!!!! :crossx:

OGShocker
01-23-2006, 12:29 PM
What is a portable stripper? :rolleyes:
They are kinda cool. When they drink too much you can carry them like a six-pack! :crossx:

ROZ
01-23-2006, 12:34 PM
Knew someone who had a nice pole setup in his home. It doubles as his coffee table.. Had plenty of SMOKING HOT tallent over there..lol... Wanted to put a solid lexan pole in and light it from both ends, but never got around to doing it... Met a school teacher and remodeled his house ...

NOTALENT
01-23-2006, 12:36 PM
I wonder if we can get a group discount....???? I have seen them for about 380bucks...my buddy in havasu said his old boss makes them and is trying to get me a price....

ROZ
01-23-2006, 12:36 PM
Don't forget a rubber despencer for when Main comes over and uses your pool table.....You gotta stop him from doing that, it keeps peeps away.
Maybe he thought it was a genepool table :confused: :D

Mrs. HOOTER SLED
01-23-2006, 12:38 PM
If i build it they shall dance :crossx:
Get to building then !!!!!! :crossx: :crossx:

NOTALENT
01-23-2006, 12:41 PM
Get to building then !!!!!! :crossx: :crossx:
I plan on buying it this or next week... :crossx: in time for the Boat show....good thing its portable... :crossx:

HOOTER SLED-
01-23-2006, 12:54 PM
I plan on buying it this or next week... :crossx: in time for the Boat show....good thing its portable... :crossx:
Have stripper pole, will travel. :devil: :D

NOTALENT
01-23-2006, 01:22 PM
Have stripper pole, will travel. :devil: :D
Haha...just let me know when the partys are.. :crossx:

BajaMike
01-23-2006, 01:28 PM
What is a portable stripper? :rolleyes:
Ya, I'll take a couple of those..... :rollside: :rollside:
:boxed:

J540
01-23-2006, 01:29 PM
I plan on buying it this or next week... :crossx: in time for the Boat show....good thing its portable... :crossx:
I know where you can get the pole for $75/85.12' long, the rest is easy to make.

NOTALENT
01-23-2006, 01:56 PM
I know where you can get the pole for $75/85.12' long, the rest is easy to make.
I have no welding expierience....I would have to look at some different types of bracing and supporting systems...but definatley possible. Where do you get them ???

BADASS38CHEVY
01-23-2006, 02:01 PM
Alright...Who's go the hook up's??? Any Idea's???
Here's the hook up! This is where we buy all of our stages from there from the O.C. Try this link http://cgi.ebay.com/Stripper-Pole-with-Stage-DOES-NOT-BOLT-TO-CEILING_W0QQitemZ4434793130QQcategoryZ3196QQssPage NameZWDVWQQrdZ1QQcmdZViewItem

NOTALENT
01-23-2006, 02:04 PM
Here's the hook up! This is where we buy all of our stages from there from the O.C. Try this link http://cgi.ebay.com/Stripper-Pole-with-Stage-DOES-NOT-BOLT-TO-CEILING_W0QQitemZ4434793130QQcategoryZ3196QQssPage NameZWDVWQQrdZ1QQcmdZViewItem
It seems that platinum stages is the only place.....Do you get a extra special good deal??? :rollside:

BADASS38CHEVY
01-23-2006, 02:07 PM
It seems that platinum stages is the only place.....Do you get a extra special good deal??? :rollside:
I can ask my wife she deals with them!

NOTALENT
01-23-2006, 02:10 PM
I can ask my wife she deals with them!
Nice...if so awesome...if not no big deal...I'm gonna try haggling with them... :crossx: Give them a little bit of business..

BADASS38CHEVY
01-23-2006, 02:13 PM
Nice...if so awesome...if not no big deal...I'm gonna try haggling with them... :crossx: Give them a little bit of business..
Call them they will give you a good deal thats what my wife does. But she buys her neons and flashing lights at spencers they are cheaper then getting them there. Heres the number 866-85-poles

NOTALENT
01-23-2006, 02:16 PM
Call them they will give you a good deal thats what my wife does. But she buys her neons and flashing lights at spencers they are cheaper then getting them there. Heres the number 866-85-poles
ahh...good idea abou the lights....That will save me some money.... :crossx: I will try it...thanks.

Run_em_Hard
01-23-2006, 02:56 PM
Alright...Who's go the hook up's??? Any Idea's???
http://www.pimpit.com/showItem.asp?pid=10621&deptID=478&order=tblProducts.id%20DESC&menu=furn&sub1=
Here is one.. and I can get you a discount on top of that. You can choose between the style of the floor and the color of the pole. Not too bad price either.

rivergoer
01-23-2006, 03:09 PM
I have no welding expierience....I would have to look at some different types of bracing and supporting systems...but definatley possible. Where do you get them ???
hey focker i weld and i even have a welder in my garage :)

Run_em_Hard
01-23-2006, 03:21 PM
Here's the hook up! This is where we buy all of our stages from there from the O.C. Try this link http://cgi.ebay.com/Stripper-Pole-with-Stage-DOES-NOT-BOLT-TO-CEILING_W0QQitemZ4434793130QQcategoryZ3196QQssPage NameZWDVWQQrdZ1QQcmdZViewItem
I just noticed that this is the same pole... I can get it to you cheaper than that. That is even ten bucks more than the people who make it. I can get you about ten percent off the price on pimpit.com

boater012
01-23-2006, 03:58 PM
hey hootersled i have a real nice older dart board and an electronic one too that i will donate to the patio ressurection project, i even have an old piece of brass railing from inside a yacht that would be the perfect stripper pole ( i was going to put on the back deck of my 51 bluewater but decided against it) you can have both for free. just taking up space right now. and im cleaning house!

BADASS38CHEVY
01-23-2006, 03:58 PM
I just noticed that this is the same pole... I can get it to you cheaper than that. That is even ten bucks more than the people who make it. I can get you about ten percent off the price on pimpit.com
It could be the same place they are in costa mesa.

LAFD
01-23-2006, 04:23 PM
I just noticed that this is the same pole... I can get it to you cheaper than that. That is even ten bucks more than the people who make it. I can get you about ten percent off the price on pimpit.com
im interested in getting one pm the info...

blackcloud75
01-23-2006, 04:41 PM
Alright...Who's go the hook up's??? Any Idea's???
www.pimpit.com

HOOTER SLED-
01-23-2006, 07:52 PM
hey hootersled i have a real nice older dart board and an electronic one too that i will donate to the patio ressurection project, i even have an old piece of brass railing from inside a yacht that would be the perfect stripper pole ( i was going to put on the back deck of my 51 bluewater but decided against it) you can have both for free. just taking up space right now. and im cleaning house!
You got a PM. :rollside:

HOOTER SLED-
01-23-2006, 07:53 PM
I know where you can get the pole for $75/85.12' long, the rest is easy to make.
:idea: :idea: :idea: Sounds like you got a weekend project over here buddy. :D

NOTALENT
01-23-2006, 07:56 PM
:idea: :idea: :idea: Sounds like you got a weekend project over here buddy. :D
If he builds it you know you have to have a "Break In Party"!!! :crossx: If he build's it they will dance on it....(women that is) :D

76ANTHONY
01-23-2006, 08:00 PM
If he builds it you know you have to have a "Break In Party"!!! :crossx: If he build's it they will dance on it....(women that is) :D
BREAK IN PARTY AT THE HOOTS :D :devil:

NOTALENT
01-23-2006, 08:02 PM
BREAK IN PARTY AT THE HOOTS :D :devil:
Welcome back...and can I say....Damn.your already at it again!!! :crossx: Next thing you know there will be a thread about this Break In Party... ;) :D

HOOTER SLED-
01-23-2006, 08:02 PM
If he builds it you know you have to have a "Break In Party"!!! :crossx: If he build's it they will dance on it....(women that is) :D
Awww dude, no doubt. It's on. Is it Spring yet? I needs to have me a paaaawty!!! :devil:

NOTALENT
01-23-2006, 08:08 PM
Awww dude, no doubt. It's on. Is it Spring yet? I needs to have me a paaaawty!!! :devil:
It doesnt need to be spring to party...!!! :crossx: Although it would be nice. Only a few more months... :cry:

HOOTER SLED-
01-23-2006, 08:11 PM
It doesnt need to be spring to party...!!! :crossx: Although it would be nice. Only a few more months... :cry:
True dat. I'm just thinkin', Warmer=pool=less clothes=tasty beer=good times. :crossx:

HOOTER SLED-
01-23-2006, 08:12 PM
BREAK IN PARTY AT THE HOOTS :D :devil:
You crazy outta control mofo!!!!!!!!!!

76ANTHONY
01-23-2006, 08:16 PM
Welcome back...and can I say....Damn.your already at it again!!! :crossx: Next thing you know there will be a thread about this Break In Party... ;) :D
i would never do such a thing, im an angel :crossx: :D :devil:

76ANTHONY
01-23-2006, 08:17 PM
You crazy outta control mofo!!!!!!!!!!
well im gettin back into the swing, hmmmm. i gots alot of catchin up to do. oh yeah, what about that, puppy thing? :crossx:

NOTALENT
01-23-2006, 08:20 PM
well im gettin back into the swing, hmmmm. i gots alot of catchin up to do. oh yeah, what about that, puppy thing? :crossx:
OUCH!!!! :crossx:

WUTWZAT
01-23-2006, 08:21 PM
Don't forget a rubber despencer for when Main comes over and uses your pool table.....You gotta stop him from doing that, it keeps peeps away.
LMAO, I've heard a table isn't a table til Main has initiated it :p .
Jason

76ANTHONY
01-23-2006, 08:23 PM
LMAO, I've heard a table isn't a table til Main has initiated it :p .
Jason
hmmmmmm same thing i heard :idea: :idea:

atomickitn
01-23-2006, 08:23 PM
well no talent if you was to ask nice i might build you a portable stage ....with a pole on it for you.................... :rollside:

NOTALENT
01-23-2006, 08:27 PM
well no talent if you was to ask nice i might build you a portable stage ....with a pole on it for you.................... :rollside:
Hey focker!!!! I have been waiting all damn day for you to RESPOND!!!! :D Let me know...and what I can do to help...cost etc...if your intrested I mean... :rollside:
Boat ran solid 2 weekends in a row....FREAKIN AWESOME!!! Gracias again! :)

atomickitn
01-23-2006, 08:30 PM
not a problem glad the boat is running well ..if you realy want a stage let me know , i just need to know a few details , for cost wise :idea:

NOTALENT
01-23-2006, 08:32 PM
not a problem glad the boat is running well ..if you realy want a stage let me know , i just need to know a few details , for cost wise :idea:
Yup...I really want it....Need one by Feb.17th for a new club im doing....I have been looking around...seems platinum stage is the only place selling them...starting at $369. They have some wicked Ideas...All the lights, strobes etc...Either PM me or post here what details you need..

HOOTER SLED-
01-24-2006, 05:08 AM
What CAN'T that Bobby do????? :D I may be hitting you up for some assistance on this as well Bobbylicious. :crossx:

NOTALENT
01-24-2006, 06:14 AM
What CAN'T that Bobby do????? :D I may be hitting you up for some assistance on this as well Bobbylicious. :crossx:
Sooner the better...!!! :rollside:

NOTALENT
01-24-2006, 01:05 PM
One more question....is the Brass Pole better or the Chrome Pole...???

NOTALENT
01-24-2006, 02:23 PM
anyone??? I know you women have danced on them...dont be scurred!!!

MAINEVENT
01-24-2006, 02:26 PM
One more question....is the Brass Pole better or the Chrome Pole...???
Brass is OG.....
just my .02

HOOTER SLED-
01-24-2006, 05:55 PM
Brass is OG.....
just my .02
I was gonna say that too. And brass rhymes with ASS. That's gotta count. :crossx:

NOTALENT
01-25-2006, 07:23 AM
I was gonna say that too. And brass rhymes with ASS. That's gotta count. :crossx:
Haha..I hear that...does one of the two slide better or anything??

MagicMtnDan
01-25-2006, 07:28 AM
http://i9.ebayimg.com/02/i/02/d1/33/e1_1_b.JPG

Run_em_Hard
01-25-2006, 07:34 AM
One more question....is the Brass Pole better or the Chrome Pole...???
I would have to go chrome...I like chrome.

NOTALENT
01-25-2006, 07:36 AM
I would have to go chrome...I like chrome.
Do they slide better on them??? And what do i have to do to get this going...there down the street from me...so I can pick it up..

Silver
01-25-2006, 04:27 PM
You forgot the Jagermachine, and the kegerator!!! :crossx:
Thanks for telling me butthead!!!!!!!!!!!!!!!!!!! :yuk: :argue:

Silver
01-25-2006, 04:29 PM
One more question....is the Brass Pole better or the Chrome Pole...???
Hey.....why aren't you asking me these questions!
BUTTHEAD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

JB in so cal
01-25-2006, 04:36 PM
Hey.....why aren't you asking me these questions!
BUTTHEAD!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Any pics?????????

Silver
01-25-2006, 11:05 PM
Any pics?????????
Tons! :wink:

HOOTER SLED-
01-26-2006, 04:37 AM
Tons! :wink:
Don't be shy. We like pics. :D

NOTALENT
01-26-2006, 06:30 AM
Thanks for telling me butthead!!!!!!!!!!!!!!!!!!! :yuk: :argue:
Hey.....why aren't you asking me these questions!
I didnt know you had so much expierience.... :crossx: And its not a definate...were still trying to work something out for the HOOTS!!! :rollside:

NOTALENT
01-26-2006, 06:31 AM
Tons! :wink:
Dont be scurred..!!! Post them. :devil:
We will be @ Taco Surf Tonight in Los Al if you want to cruise by and chat...