Rexone

[djunkie]

I'm thinking ordering a couple of gauges from you for my Rhino. Do these come with the rubber boot to cover the back up?
http://shopping.rexmar.com/Merchant2/merchant.mvc?Screen=CTGY&Category_Code=CFElec216

[Rexone]

No rubber boots, sorry. :(

[djunkie]

No rubber boots, sorry. :(
:cry: So how long do you think they'll last mounted in the dash of the Rhino?

[Rexone]

Hard to say. I've had a lot of guys buying them for sand rails etc for years though. A lot of Carbon Fiber stuff in particular. I would think you could make some boots out of some thin rubber stretched over the backs and secured with big tie wraps around the case of the gauges to keep most the dust out. It would probably be a good aftermarket item for someone in the molded rubber industry to make.

[djunkie]

This place has them on their guages but the price is unreal.
http://www.blackrhinoperformance.com/ProductInfo.aspx?productid=GAU302030

[Rexone]

Call them and see if they'll sell you the boots. They may have someone making them just for them. I'm pretty sure its not an Auto Meter offering.

[djunkie]

Call them and see if they'll sell you the boots. They may have someone making them just for them. I'm pretty sure its not an Auto Meter offering.
I'm probably just gonna order them from you. I'll figure something out to protect them.

[BIGAMIST]

Buy the gauges from Rex then get some rubber coating dip from these guys unifireusa.com, just dip it two or three times & you'll be all good :cool:

[Rexone]

The stuff in the bottom right corner of this page (http://www.rexmar.com/page381.html) works pretty well for sealing stuff up too.

[76ANTHONY]

yo junkie, you can buy that shiat a home depot, its in the elec isle...same shiat buy it by the foot, cheap stuff............. :)

[djunkie]

yo junkie, you can buy that shiat a home depot, its in the elec isle...same shiat buy it by the foot, cheap stuff............. :)
Thanks. Gonna order the guages today from Rex then I'll get some of that stuff.

[PICKLEtheLOAD]

Sounds like you haved a plan, just in case...here is another option. A lot of RC dudes use this stuff to "waterproof" different radio components. It may work for your app. Good luck...
http://www.plastidip.com/consumer/index.html

[lucky]

fock - I have some rubbers that will work -- right in my wallet buhahahahaha

[YeLLowBoaT]

what about cutting the hole about 1/16th over and using a uniseal? I know from exp in the custom aquaruim biz that they take vibration really well with out cuasing a leak( plus they are the best way I know of to seal a pipe to the side of another pipe of diffrent materials), They might work for this app.
uniseal (http://www.uniseal.co.nz/index.html)

[SummitKarl]

DJ...go get some 2" heat shrink tubing for the back of the guages:idea:

[djunkie]

DJ...go get some 2" heat shrink tubing for the back of the guages:idea:
I have an old bicycle inner tube that I can tie wrap behind the guage also. That would work for what I want to do.

[OutCole'd]

You can always use one of these.
http://www.***boat.com/image_center/data/520/1075t_magnum_l_12box1.jpg

[76ANTHONY]

I have an old bicycle inner tube that I can tie wrap behind the guage also. That would work for what I want to do.
thats a pretty good idea, your just keepin dust and moister out right?:)

[djunkie]

You can always use one of these.
http://www.***boat.com/image_center/data/520/1075t_magnum_l_12box1.jpg
Ya I use those for protection on my stick.

[djunkie]

thats a pretty good idea, your just keepin dust and moister out right?:)
Thats pretty much it.

[396_WAYS_TO_SPIT]

You can always use one of these.
http://www.***boat.com/image_center/data/520/1075t_magnum_l_12box1.jpg
He uses those along with preperationH :p

[396_WAYS_TO_SPIT]

Hey rexie, I may need a set of beede guages. Pm me with a price for a set tach/oil/volt/temp;)

[Eliminator 4 Life]

fock - I have some rubbers that will work -- right in my wallet buhahahahaha
Dude those things have been in there so long they probably are dry and wont even unfold with out cracking hahaha:mix:

[djunkie]

Hey rexie, I may need a set of beede guages. Pm me with a price for a set tach/oil/volt/temp;)
Why don't you just go to his website and look for yourself lazy ass!!!!! :D :D

[LUVNLIFE]

fock - I have some rubbers that will work -- right in my wallet buhahahahaha
Wouldn't they be kinda small Chris? After all I heard you were looking to India for the right size:)