PDA

View Full Version : rhino question



boatnam3
01-12-2007, 05:54 PM
where is the cdi box in the 07's?

RiverRatMike
01-12-2007, 05:55 PM
where is the cdi box in the 07's?
not sure about the 07's. did you check in the battery box? that is where the cdi box for the 2006 models is located.

CHAD1
01-12-2007, 05:58 PM
Its In The Battery Box.

boatnam3
01-12-2007, 06:00 PM
thanks guys.

INSman
01-13-2007, 09:26 AM
New Dynatek CDI, ehhhh ?? :D
Best to pull the battery out to get easy access to the CDI box an the subsequent replacement. 10mm I believe is size tool needed.

boatnam3
01-13-2007, 10:13 AM
New Dynatek CDI, ehhhh ?? :D
Best to pull the battery out to get easy access to the CDI box an the subsequent replacement. 10mm I believe is size tool needed.
yea man,spent friggin 1000 bucks the other day and went in only to buy a set of leg menders.plan on running it hard this weekend but it didn't pan out.so i guess that will give me time to cruise it around and break it in.

INSman
01-13-2007, 10:59 AM
yea man,spent friggin 1000 bucks the other day and went in only to buy a set of leg menders.plan on running it hard this weekend but it didn't pan out.so i guess that will give me time to cruise it around and break it in.
$1k is ONLY the beginning my friend :(
You might want to look into a clutch sheave, intake snorkel upgrade, clutch filter, k&N filter kit, rectifier along with some minor jetting as follows:
http://cgi.ebay.com/ebaymotors/YAMAHA-RHINO-660-PERFORMANCE-CLUTCH-SHEAVE_W0QQitemZ280069772616QQihZ018QQcategoryZ439 77QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Hi-Perf-ATV-Grizzly-Rhino-660-RECTIFIER_W0QQitemZ130066925594QQihZ003QQcategoryZ 43981QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Roostin-Rhino-RAIS-Power-Tube-Yamaha-Intake-Snorkel_W0QQitemZ250071825215QQihZ015QQcategoryZ43 979QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Pro-Design-Yamaha-Rhino-K-N-Pro-Flow-Free-Shipping_W0QQitemZ200066806321QQihZ010QQcategoryZ4 3979QQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Uni-Rhino-CVT-Filter-04-07-Yamaha-Rhino-A-Must-Buy-LOOK_W0QQcmdZViewItemQQcategoryZ43979QQihZ001QQite mZ110077922659

boatnam3
01-13-2007, 12:00 PM
$1k is ONLY the beginning my friend :(
You might want to look into a clutch sheave, intake snorkel upgrade, clutch filter, k&N filter kit, rectifier along with some minor jetting as follows:
http://cgi.ebay.com/ebaymotors/YAMAHA-RHINO-660-PERFORMANCE-CLUTCH-SHEAVE_W0QQitemZ280069772616QQihZ018QQcategoryZ439 77QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Hi-Perf-ATV-Grizzly-Rhino-660-RECTIFIER_W0QQitemZ130066925594QQihZ003QQcategoryZ 43981QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Roostin-Rhino-RAIS-Power-Tube-Yamaha-Intake-Snorkel_W0QQitemZ250071825215QQihZ015QQcategoryZ43 979QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Pro-Design-Yamaha-Rhino-K-N-Pro-Flow-Free-Shipping_W0QQitemZ200066806321QQihZ010QQcategoryZ4 3979QQrdZ1QQcmdZViewItem
http://cgi.ebay.com/ebaymotors/Uni-Rhino-CVT-Filter-04-07-Yamaha-Rhino-A-Must-Buy-LOOK_W0QQcmdZViewItemQQcategoryZ43979QQihZ001QQite mZ110077922659
yea i know i think im starting to get it.so ebay is a good place to buy stuff?

No Name
01-13-2007, 12:03 PM
yea i know i think im starting to get it.so ebay is a good place to buy stuff?
eBay is a great place to buy anything, just make sure you look at the sellers feedback before making a purchese.

andy01
01-13-2007, 12:47 PM
It's a Rhino, spend 10K in parts and go 48 mph....... don't waste to much money on it, IT'S A RHINO SKINNY! Get ahold of Scott, he has bought all of the stuff mentioned above, find out who he bought it from. He has had good luck with parts showing up and fitting right. If you do a cage or cage work let me know, I have a guy down here that does some nice work.
Andy

RiverRatMike
01-13-2007, 02:15 PM
It's a Rhino, spend 10K in parts and go 48 mph....... don't waste to much money on it, IT'S A RHINO SKINNY! Get ahold of Scott, he has bought all of the stuff mentioned above, find out who he bought it from. He has had good luck with parts showing up and fitting right. If you do a cage or cage work let me know, I have a guy down here that does some nice work.
Andy
48 mph stock? HUH that's funny, mine does 53mph with the BRP CDI unit

phebus
01-13-2007, 02:30 PM
48 mph stock? HUH that's funny, mine does 53mph with the BRP CDI unit
Dude, if your Rhino ran your ass over, you would still get up and kiss it, and tell it how much you love it.

boatnam3
01-13-2007, 03:23 PM
well i just took mine out for its first romp in the hills it did real good.mine went 40 before it hi the limiter came in down a slight down hill.it went 52 with it on 15 minutes later.i raced my neighbor we went side by side until he hit his limiter and then i left him.so i guess it works good on the top end.heading down to by a filter kit and jet kit.see how that does.

boatnam3
01-13-2007, 03:24 PM
oh yea it cost 200 bucks so a good investment i think.

boatnam3
01-13-2007, 03:29 PM
It's a Rhino, spend 10K in parts and go 48 mph....... don't waste to much money on it, IT'S A RHINO SKINNY! Get ahold of Scott, he has bought all of the stuff mentioned above, find out who he bought it from. He has had good luck with parts showing up and fitting right. If you do a cage or cage work let me know, I have a guy down here that does some nice work.
Andy
im not going to waste to much money,yea i plan on doing a cage but trying to get a buddy to build it 2k is a rip off but you need a good one.i will get ahold of you and maybe talk to your guy if my guy cant do it thanks.

djunkie
01-13-2007, 03:29 PM
The CDI is a must have. If you plan on really driving this thing hard please get some better seat belts and leg protection. You won't regret it.

boatnam3
01-13-2007, 03:33 PM
The CDI is a must have. If you plan on really driving this thing hard please get some better seat belts and leg protection. You won't regret it.
yea that is what i spent the 1k on.3" belts,belt bar and leg minders.they work because i climber a big off camber rock and it felt like it wanted to roll and my instict was to put my foot out.good investment!

djunkie
01-13-2007, 03:37 PM
yea that is what i spent the 1k on.3" belts,belt bar and leg minders.they work because i climber a big off camber rock and it felt like it wanted to roll and my instict was to put my foot out.good investment!
Good call. I've heard too many nightmare stories of people sticking their feet out. Before you buy anything else let us know. Theres quite a few of us on here that may be able to point you in the right direction for parts.

boatnam3
01-13-2007, 03:39 PM
Good call. I've heard too many nightmare stories of people sticking their feet out. Before you buy anything else let us know. Theres quite a few of us on here that may be able to point you in the right direction for parts.
cool thanks.i think...i hope im done for awhile.

djunkie
01-13-2007, 03:40 PM
cool thanks.i think...i hope im done for awhile.
LOL!!!! Ya right. Do you know what you've gotten yourself into? :crossx: :crossx: :crossx:

boatnam3
01-13-2007, 03:42 PM
LOL!!!! Ya right. Do you know what you've gotten yourself into? :crossx: :crossx: :crossx:
lo yea i know i keep telling it that its my wifes and leave it stock...