PDA

View Full Version : Swing away tongue converison. Where, how much?



beaverretriever
01-16-2007, 11:19 AM
I have a friend that found a real good deal on a super clean Ultra that he is in the process of purchasing. He only has a two car garage, and is afriad it won't fit with the standard non swing away tongue.
Can he have the trailer converted to a swing away? If so, how much will it cost and who can do it? Would it be worth while taking it down to Extreme to get it done?
Thanks for the help in advance.

2Driver
01-16-2007, 11:23 AM
I had mine done for $800 at VIP Trailers in Phoenix. It is a tandem with 4 wheel disc brakes. They did a decent job and matched the paint. So far so good and now it is in my garage. :)

beaverretriever
01-16-2007, 11:28 AM
I had mine done for $800 at VIP Trailers in Phoenix. It is a tandem with 4 wheel disc brakes. They did a decent job and matched the paint. So far so good and now it is in my garage. :)
Thats a good start. Now at least he will know it can be done. I told him it shouldn't be a problem. I even estimated it will cost him 600-1000 bucks. Still cheaper than buying a new trailer.
Anyone know of sombody here in Vegas that can do it?

ULTRA28
01-16-2007, 12:02 PM
Call Extreme. They sell a conversion kit that just about anybody can install.
1.951.682.5522

Music to my Ears
01-16-2007, 12:04 PM
Nordic did mine last year for $250. :)

beaverretriever
01-16-2007, 12:45 PM
Thanks for the help guys and gals. He actually already read the thread and is making some calls. :smile:

Not So Fast
01-16-2007, 01:54 PM
Enduro Trailer did my sons for $500 last year. Here in Havasu. NSF

TrojanDan
01-16-2007, 03:10 PM
Enduro Trailer did my sons for $500 last year. Here in Havasu. NSF
Enduro did mine about 4 years ago for a 29' boat for a little less than that. He did a good job but I think he is in the process of moving his business somewhere.

Not So Fast
01-16-2007, 05:55 PM
Enduro did mine about 4 years ago for a 29' boat for a little less than that. He did a good job but I think he is in the process of moving his business somewhere.
Yep you are right. Glenn wants to sell the business but Gary does most of the work so it will probably close I guess. I have Garys home business address and phone if you need it. He may go to work at another shop but not sure at this point. He's a good guy. NSF