Banshee

[Powerquestboy]

Anybody got a Banshee in here? Where do you get your parts? Who has the hook ups?
http://www.***boat.com/image_center/data/500/Banshee_001.jpg

[Bense468]

I have the same year. With work done. Parts depend on what you need. Not everybody carries everything.

[Powerquestboy]

I just bought new bars and bar clamp and I want ASV levers but they are expensive! Cheapest I can find on the web is $150 for the Clutch and Brake.

[Havasu Carrera]

They have a e-bay store And you get them real quick.

[Powerquestboy]

It seems like all their stuff on ebay is refurbished. There is another company on ebay offering the their midrange levers for 105 for the whole set which is the same as I have found on another site on the web. Just wondering if someone has a hook-up. I'm buying a ton of stuff for the bike so I'm trying to save my pennies. Already got new Bars and clamp just need the levers and its off to another part of the bike.

[SoCalSouthpaw]

Greetings. Shoot me a PM. I have a sizable hookup on just about everything bike, atv, etc...
EX: The levers you are talking about I can get for 128.80.
Only issue is I live in San Diego. So, PM me and I will give you my #, we could figure sumpin out.

[wsuwrhr]

A little far from me, but I could also get you whatever you need.
Looks like CPI big bore pipes on the bike and a longer swinarm. Is it a stroker motor? Stock cylinders? I can't really tell from the angle.
I run a +10 mil Banshee, 535cc, T-Rex cylinder, honest 100HP machine. Setup up pretty much like yours is.
Racer's Edge (http://teamracersedge.com)
Brian

[wsuwrhr]

Looks like it is running a little lean too.
Brian

[Powerquestboy]

A little far from me, but I could also get you whatever you need.
Looks like CPI big bore pipes on the bike and a langer swinarm. Is it a stroker motor? Stock cylinders? I can't really tell from the angle.
I run a +10 mil Banshee, 535cc, T-Rex cylinder, honest 100HP machine. Setup up pretty much like yours is.
Racer's Edge (http://teamracersedge.com)
Brian
Yes they are CPI's in fact the one your looking at has a hairline crack in it so its coming off today and getting sent back to CPI for repair and re-chrome. To be honest I have no clue what has been done to this motor. I bought the bike used from Magic34 on the boards, it belonged to a friend of his. Its got stock carbs and its definitley not a stroker motor but this thing is fast as hell. It smokes all my buddy's banshees even the ones that have had motor work done. I had a mechanic ride it and tell me there is no way it is stock. Then had a another mechanic tould me it has never been opened up so I have no clue. I would love to know the real story but it runs great and starts easier than any bike I have ever been around. This thing will literally sit for 3 months and start first kick.
These are the levers I want and I think I have decided to go with the middle of the road lever but this is the cheapest I can find them for
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=006&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=160085389365&rd=1,1

[Powerquestboy]

Wsuwrhr
Lets see some pics of that bike

[wsuwrhr]

Wsuwrhr
Lets see some pics of that bike
http://www.***boat.com/image_center/data/520/63Christie.jpg

[wsuwrhr]

http://www.***boat.com/image_center/data/520/63Christie2.jpg

[wsuwrhr]

http://www.***boat.com/image_center/data/520/63Christie1.jpg

[Magic34]

Yes they are CPI's in fact the one your looking at has a hairline crack in it so its coming off today and getting sent back to CPI for repair and re-chrome. To be honest I have no clue what has been done to this motor. I bought the bike used from Magic34 on the boards, it belonged to a friend of his. Its got stock carbs and its definitley not a stroker motor but this thing is fast as hell. It smokes all my buddy's banshees even the ones that have had motor work done. I had a mechanic ride it and tell me there is no way it is stock. Then had a another mechanic tould me it has never been opened up so I have no clue. I would love to know the real story but it runs great and starts easier than any bike I have ever been around. This thing will literally sit for 3 months and start first kick.
These are the levers I want and I think I have decided to go with the middle of the road lever but this is the cheapest I can find them for
http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=006&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=160085389365&rd=1,1
That one did run hard. I couldn't get the tires to even hook up in the back yard. They spun so fast it just threw dirt everywhere.
Glad you like it. Didn't your buddy buy the pumpkin head bike as well?

[phebus]

Looks like it is running a little lean too.
Brian
Also, I think your tire pressure is a little soft. :D

[wsuwrhr]

Also, I think your tire pressure is a little soft. :D
????

[Powerquestboy]

That one did run hard. I couldn't get the tires to even hook up in the back yard. They spun so fast it just threw dirt everywhere.
Glad you like it. Didn't your buddy buy the pumpkin head bike as well?
Yes, my buddy did buy the pumpkin head bike. We call it the sleepy hallow express. That thing is basket case. He is now on motor number 3 a lot of it is his fault though. I think that bike is just too modified. When it runs it runs hard but it has only run for about 20 minutes total in 2 trips to the dunes. I have had pretty good luck with my bike, only a few minor problems, I took it to a D&M racing and had it gone through so I was posative it was set up right.

[Run_em_Hard]

I had one...87', Bored, stretched, chromed, carbed and more. I really liked rockeymountainatv.com or if you want to do a performance shop try K&T Performance here in Utah. They are really popular. Made a banshee called Krankenstine(sp) that is well kown. They also do 250r's.
K & T Performance
4836 S 3200 W
Roy, UT 84067
801-825-5870

[Powerquestboy]

I had one...87', Bored, stretched, chromed, carbed and more. I really liked rockeymountainatv.com or if you want to do a performance shop try K&T Performance here in Utah. They are really popular. Made a banshee called Krankenstine(sp) that is well kown. They also do 250r's.
K & T Performance
4836 S 3200 W
Roy, UT 84067
801-825-5870
This bike is from Utah and K&T are the ones who built this bike. I heard from my mechanic here that they are VERY good.

[Magic34]

This bike is from Utah and K&T are the ones who built this bike. I heard from my mechanic here that they are VERY good.
They did pumpkin too if I assume correctly.
When he bought it, I couldn't believe he was telling me that it was his first bike. Very nice guy too.

[Run_em_Hard]

K&T are some super nice guys...I live about a half an hour from them and have been to thier place a few times, sometimes just to chat ATV's. They do it all in a nice shop behind thier house. They sure do make some beautiful bike that can run. The older guy is awesome to work with. He always seems to be wrenching on something. He is full of info if any is needed. Can't remember his name, I sold my banchee over a year ago. They also cary lots of custom parts that they have machined just for them.

[Bense468]

They build some fast bikes.
http://www.ktperformance.com/

[wsuwrhr]

"Kim Muchmore" is his name.
If you don't go to Racers Edge, then K&T are the next guys you want to go to.
Brian
K&T are some super nice guys...I live about a half an hour from them and have been to thier place a few times, sometimes just to chat ATV's. They do it all in a nice shop behind thier house. They sure do make some beautiful bike that can run. The older guy is awesome to work with. He always seems to be wrenching on something. He is full of info if any is needed. Can't remember his name, I sold my banchee over a year ago. They also cary lots of custom parts that they have machined just for them.

[uselessgrant]

try GT performance in Dearborn Mo. dudes name is Garrett.. makes 30lb banshee frames and does some nasty port work.. sends it all over the usa. BUILT a custom sand racer with a arctic cat snowmobile engine that went about 3.5 sec in 100 yds maybee even faster. :D