Boat lettering in Havi?

[selfmade]

I am getting my new boat coastguard documented and I need the hailing port painted on the back. Any suggestions in havasu? thanks guys

[Trailer Park Casanova]

I go to the instant sign places and get in done in Vinyl.
They usually charge under $40 bucks, and get the color and style perfect.

[selfmade]

I go to the instant sign places and get in done in Vinyl.
They usually charge under $40 bucks, and get the color and style perfect.
I was thinking the same thing too, but I thought the name had to be permanently affixed to the transom and this would not fly

[trailerpark_tj]

I used Patrick Kuntz for my numbers, I believe he also does lettering and will come to your boat storage to do it:
http://www.citlink.net/~pkuntz/

[Havasu_Dreamin]

Don Burda Design (http://www.burdesign.com/)

[Big Kahunaa]

i got a guy in bullhead here that kicks ass

[DeltaSigBoater]

I was thinking the same thing too, but I thought the name had to be permanently affixed to the transom and this would not fly
The GC couldnt care less how you apply your boat's name & hailing port, just as long as its there, shit you could use permeant marker. I've seen guys use everything from vinyl to paint, and even raised letters.
What does have to be permanently affixed inside your is your vessel's documentation number. A lot of people put this in there engine compartment/room, or in larger yachts mounted on the bulkhead in the wheel house.

[Ivan Dan]

I am getting my new boat coastguard documented and I need the hailing port painted on the back. Any suggestions in havasu? thanks guys
Stan....call my buddy Tim with Signpros Custom Lettering 714-447-3581 and have him make them for you in vinyl. Make sure to tell him I referred you so he takes care of you.

[Troy McClure]

I found this, it might help:
INSTRUCTIONS FOR COMPLETING FORM CG-1258...
NAME AND HAILING PORT: For Recreational vessels the name and hailing port must marked together on some clearly visible exterior part of the hull. For Commercial vessels the name must be marked pm each bow and the vessel name and hailing port must also be marked on the stern. The markings may be made by the use of any means and materials that result in durable markings. All must be at least 4 inches in height, made in clearly legible letters o the Latin alphabet or Arabic or Roman numerals. A vessel’s Hailing Port marking must include BOTH a place (city) and the state, territory or possession where the place (city) is located. Only the state, territory or possession maybe abbreviated unless the city is a commonly known abbreviation, such as N.Y., N.Y.

[selfmade]

Thanks for all of the quick responses

[Quest4Fun]

Don Burda is good and so is Scott Montgerard of Letters, Lines & Designs. Scott will come to your house or storage - he's in Havasu...928-854-1919

[parker guy]

Scott @Letter Lines & Designs did my AZ # he did a awsome job.:)

[Ivan Dan]

Stan....call my buddy Tim with Signpros Custom Lettering 714-447-3581 and have him make them for you in vinyl. Make sure to tell him I referred you so he takes care of you.
Forgot to give you his website....www.SignPros.com (http://www.signpros.com) Having Tim do it might cost you a ride in your boat though! :D

[UnionJack]

My pops, Bob 909.987.4424

[reDECKulous]

Don Burda... the guy is a god.... 928-855-2853

[DaddyMack]

Any of these guys do gold leaf??

[Old Man Havasu]

Scott @Letter Lines & Designs did my AZ # he did a awsome job.:)
I agree! Scott is great with that airbrush! He did the name on my boat.